My Account
$0 - $100
$101 - $350
Over $351

Secured by PayPal

?

Home>BD Saw Cut Loops
BD Saw Cut Loops
Why Use BD Loops  Preformed Inductance Loops?
 
Security:
9 years of business and only 1 loop failure.
Wire is UL Certified.
Convenience:
Over 34 standard sizes; 200 of each model always in stock. Custom loop dimensions or lead-in length are always available and can be shipped same day.
Loop is packaged as a kit. Everything you need is inside the package and will save 15-30min in installation time per loop.
 
Performance:
All loops are made with 14 & 16AWG two to three times at much copper per foot vs. 18AWG.
Will save you 15-30min per loop in installation time vs. wrapping your own.
9 years of business 200,000 loops installed and only 1 loop failure.
Products (Total Items: 21)
More results: [1] 2 Next Page
BD Loops - Exit Loop  - 4' X 6'  or  3' x 7' Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 4' X 6' or 3' x 7' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$91.88
BD Loops - Reverse Loop / Safety Loop - 4' X 6'  or  3' x 7' Saw Cut Performed Loops with 20' Lead BD Loops - Reverse Loop / Safety Loop - 4' X 6' or 3' x 7' Saw Cut Performed Loops with 20' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$77.88
BD Loops - Reverse Loop / Safety Loop - 4' X 8'  or  6' x 6' Saw Cut Performed Loops with 20' Lead BD Loops - Reverse Loop / Safety Loop - 4' X 8' or 6' x 6' Saw Cut Performed Loops with 20' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$78.75
BD Loops - Exit Loop  - 4' X 8'  or  6' x 6' Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 4' X 8' or 6' x 6' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$93.63
BD Loops - Exit Loop  - 4' X 8'  or  6' x 6' Saw Cut Performed Loops with 100' Lead BD Loops - Exit Loop - 4' X 8' or 6' x 6' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$112.00
BD Loops - Exit Loop  - 4' X 10'  or  6' x 8' Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 4' X 10' or 6' x 8' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$105.00
BD Loops - Exit Loop  - 4' X 10'  or  6' x 8' Saw Cut Performed Loops  with 100' Lead BD Loops - Exit Loop - 4' X 10' or 6' x 8' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$131.25
BD Loops - Exit Loop  - 4' X 12'  or  6' x 10' Saw Cut Performed Loops with 100' Lead BD Loops - Exit Loop - 4' X 12' or 6' x 10' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$138.25
BD Loops - Reverse Loop / Safety Loop - 4' X 12'  or  6' x 10' Saw Cut Performed Loops with 20' Lead BD Loops - Reverse Loop / Safety Loop - 4' X 12' or 6' x 10' Saw Cut Performed Loops with 20' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$103.25
BD Loops - Exit Loop  - 4' X 12'  or  6' x 10' Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 4' X 12' or 6' x 10' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$117.25
BD Loops - Exit Loop  - 6' X 12'  Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$122.50
BD Loops - Exit Loop  - 6' X 12'  Saw Cut Performed Loops with 100' Lead BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$145.25
BD Loops - Reverse Loop / Safety Loop - 6' X 12'  Saw Cut Performed Loops with 20' Lead BD Loops - Reverse Loop / Safety Loop - 6' X 12' Saw Cut Performed Loops with 20' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$112.00
BD Loops - Exit Loop  - 6' X 14'  Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 6' X 14' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$126.88
BD Loops - Exit Loop  - 6' X 14'  Saw Cut Performed Loops with 100' Lead BD Loops - Exit Loop - 6' X 14' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$150.50
BD Loops - Reverse Loop / Safety Loop - 6' X 16'  Saw Cut Performed Loops with 20' Lead BD Loops - Reverse Loop / Safety Loop - 6' X 16' Saw Cut Performed Loops with 20' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$122.50
BD Loops - Exit Loop  - 6' X 16'  Saw Cut Performed Loops with 50' Lead BD Loops - Exit Loop - 6' X 16' Saw Cut Performed Loops with 50' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$131.25
BD Loops - Exit Loop  - 6' X 16'  Saw Cut Performed Loops with 100' Lead BD Loops - Exit Loop - 6' X 16' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$156.63
BD Loops - Exit Loop  - 6' X 20'  Saw Cut Performed Loops with 100' Lead BD Loops - Exit Loop - 6' X 20' Saw Cut Performed Loops with 100' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$168.00
BD Loops - Reverse Loop / Safety Loop - 6' X 20' Saw Cut Performed Loops with 20' Lead BD Loops - Reverse Loop / Safety Loop - 6' X 20' Saw Cut Performed Loops with 20' Lead
BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
$127.75
More results: [1] 2 Next Page