GTO GP SL100 Commercial Duty Slide Gate Operator, GTO Gate Openers The GP SL100 is designed for operation of slide gates. The GP-SL100 is designed for continuous duty operation of slide gates.Max Gate Weight 1200 lbs. (544.3 kg), Length 37 ft. (11.3 m) with a 32 ft. (9.8 m) opening. (For bi-parting dual gates, a second operator is required). Assumes gate to be free sliding, in good working condition, and on a level plane. Motor
Brushless DC motor 24VDC 300 watts
½ Horsepower
Maximum motor current 20Amp
2500 RPM
Open and close time 1 ft/sec Gear Reducer
Aluminum Cased 25:1 size 50 worm reducer with ball bearings.
Permanently lubricated with synthetic gear oil oil specifications 5w-30, Mobil 1 recommended Power
120 vac @60 Hz with inherent 24 vdc battery backup
Batteries are required two 12 vdc, U1, 230A minimum cold crank amps wired together in series.
100 cycles in backup typical for minimum size battery.
15 amp circuit breaker on dedicated circuit
On board 120 vac outlet for accessories that pull no more than 1 amp of current Control
Mirocontroller based logic control board
Adjustable autoclose
Independent obstruction settings
Diagnostic LEDs & Audible Alarms
Accessory terminals compatible with loop detectors, photo beams, edge sensors, push buttons, card readers, exit wands, etc.
Relay Outputs
On board Open and Close buttons
Jog Buttons Construction
Heavy duty steel frame rotomolded UV stabilized HDPE cover
RB207-20 #41 Chain, 20ft (6.1m) Operational Capacity
Continuous duty operations
Max rating: 32 foot opening for 37 foot gate @ 1200 lbs
Dual Gate compatible using two conductor 22 AWG shielded wire rated for direct burial. Recommended Belden Wire®,
22 AWG, type 8761, 9461, 9451, 1266A or equivalent. 1-pair shielded with drain wire. Available at electrical supply store. Dimensions
Housing Dimensions: height 27 in (68.7 cm), depth 18 in (45.7 cm), width 15 in (38 cm), shipping weight: 80-85 lbs
Concrete Pad Dimensions: 18 in x 18 in, (45.7 cm x 45.7 cm). Consult local building codes for depth below
ground level. Absolute minimum depth 18 in (45.7 cm) below ground level. Operational Temperature:
In colder climates (ambient temperatures less than 10 degrees) GTO recommends the use of a thermostatically controlled heating source (ceramic heating strips, etc.) on the batteries and gearbox assembly. Styles, types, and power requirements of heating devices will vary by climate and region.
Warranty:
Residential (7) years for mechanical parts, (5) years electronic components
Commercial (5) years for mechanical parts, (3) years electronic components | Construction
Heavy duty steel frame rotomolded UV stabilized HDPE cover
RB207-20 #41 Chain, 20ft (6.1m) Operational Capacity
Continuous duty operations
Max rating: 32 foot opening for 37 foot gate @ 1200 lbs
Dual Gate compatible using two conductor 22 AWG shielded wire rated for direct burial. Recommended Belden Wire®,
22 AWG, type 8761, 9461, 9451, 1266A or equivalent. 1-pair shielded with drain wire. Available at electrical supply store. Dimensions
Housing Dimensions: height 27 in (68.7 cm), depth 18 in (45.7 cm), width 15 in (38 cm), shipping weight: 80-85 lbs
Concrete Pad Dimensions: 18 in x 18 in, (45.7 cm x 45.7 cm). Consult local building codes for depth below
ground level. Absolute minimum depth 18 in (45.7 cm) below ground level. Operational Temperature:
In colder climates (ambient temperatures less than 10 degrees) GTO recommends the use of a thermostatically controlled heating source (ceramic heating strips, etc.) on the batteries and gearbox assembly. Styles, types, and power requirements of heating devices will vary by climate and region.
Warranty:
Residential (7) years for mechanical parts, (5) years electronic components
Commercial (5) years for mechanical parts, (3) years electronic components | |
