My Account  |  0 item(s)    View Cart
Home > Sentry 300 Series > Sentry 300 Accessories
 

Sentry 300 Accessories

ACCESSORY WIRING INFORMATION
All accessories must be 12 VDC compatible and have less than a 10ma current draw in stand by mode. Solar Friendly accessories recommended will have less than a 2ma current draw in stand by mode.

These devices will typically all wire as described below:
1. +12 VDC power will connect to J2 pin 1
2. Accessory ground will connect to J2 pin 2
3. The common for the accessory relay common is a ground connection connect to J2 pin 2

The accessory relay N/O is the command line and will connect to the input of the control board that provides the function desired from the accessory being installed. For example if a photo eye is being wired for safety (keep gate from closing on a car) then it connects to J2 pin 5. If this device was being installed to Open the gate when activated it would wire to J2 pin 3.
 
 Products (Total Items: 13)
Sentry 300 630050 Charge Cable Extension Kit for Sentry Gate Openers Sentry 300 630050 Charge Cable Extension Kit for Sentry Gate Openers
The Sentry Charge Cable Extension Kit is needed when the battery charger power supply (Solar panel or AC transformer) is located more than 15 away from the control box
$31.27
Sentry 300 520015 Solar Panel Kit 5 Watt Solar Panel Sentry Gate Openers Sentry 300 520015 Solar Panel Kit 5 Watt Solar Panel Sentry Gate Openers
520015 Solar Panel Kit 5 Watt Solar Panel is used to make your garage door opener compatible with the Sentry transmitters, reduce the devices in your car. The Sentry solar panel kit may be used to charge the battery in the Sentry gate opener
$94.95
Sentry 300 Transformer 520008 Low Voltage UL Sentry 300 Transformer 520008 Low Voltage UL
Sentry 300 Automatic Transformer 520008 Low Voltage UL supplied is a low voltage UL approved transformer for this type of application. This device being used is equipped with a DC plug for easy connection to the charge controller and can easily provide 575 cycles of operation a day without decreasing the battery charge. In the event AC power goes out the opener will operate for weeks on the battery (if cycles per day are below 20) before needing service
$24.95
Sentry 300 Garage Receiver 030209 Sentry 300 Garage Receiver 030209
Sentry 300 Garage Receiver 030209 is used to make your garage door opener compatible with the Sentry transmitters, reduce the devices in your car. The kit contains receiver, transformer and a wire harness that easily installs to the existing garage door
$56.74
Sentry 300 Push To Operate Wireless Button 050510 Sentry 300 Push To Operate Wireless Button 050510
Push To Operate Wireless Button 050510 is used to operate the gate in applications not requiring the security of a code. The Push to Operate transmitter is designed for outdoor installation. Install to allow operation of the gate or garage by simply pressing the pad
$47.95
Sentry 300 Exit Sensor 070310 Automatically Gate Opener Sentry 300 Exit Sensor 070310 Automatically Gate Opener
Exit Sensor 070310 automatically opens the gate when a car passes. The driveway exit sensor is a magnetic device that installs below ground beside the drive.
$235.00
Sentry 300 Metal Wireless Keypad 050550 Sentry 300 Metal Wireless Keypad 050550
Metal Wireless Keypad 050550 is used to open or close the gate by using a secure pre-programmed code. Up to 24 different codes possible.
$153.46
Sentry 300 Wireless Keypad 050520 Sentry 300 Wireless Keypad 050520
Wireless Keypad 050520 this tamper-resistant, weatherproof, programmable Multi-code Wireless Keypad can be mounted outside your gate and offer convenient access without having to carry a transmitter.
$57.95
Sentry 300 7 Day Timer 550015 Solar Friendly Design Sentry 300 7 Day Timer 550015 Solar Friendly Design
The 7 Day Timer 550015 can be used to open the gate at a preset time and if the auto close feature of the gate opener is being used the gate can then close automatically at a preset time. The timer is supplied with a 3 wire harness that easily wires to the control board
$39.95
Sentry 300 Photo Eye Kit 550012 Sentry 300 Photo Eye Kit 550012
The Photo Eye Kit 550012 is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection
$62.95
Sentry 300 Electric Gate Lock 070510 Sentry 300 Electric Gate Lock 070510
The US Electric Gate Lock 070510 works with an automatic gate operator to securely lock the gate into position without having to step out of a vehicle. The USAutomatic Electric Gate Lock is wired into the gate operator control box, and when an input device such as a transmitter or keypad is used to open the gate, the USAutomatic Electric Gate Lock disengages. The gate will then swing open. When closing the gate, the gate retracts and the gate lock automatically engages to secure the gate in the closed position.
$204.95
Sentry 300 LCR Transmitter 030212 4 Button Remote Sentry 300 LCR Transmitter 030212 4 Button Remote
LCR Transmitter 030212 4 Button Remote Setup: (It is recommended that the dipswitch code be changed from the default factory setting). 1. Open the battery compartment door and locate the dipswitches. 2. Change the dipswitches to the settings you prefer, record for future reference. Transmitter Left Button to Receiver Programming: (standard Open/Stop/Close function). Press and hold the left transmitter button down. Red light on transmitter should be on. On the receiver, push the P1 push-button until the green LD light comes on. Release both buttons. Transmitter left button to receiver programming is complete
$19.50
Sentry 300 LCR Transmitter 030210 2 Button Remote Sentry 300 LCR Transmitter 030210 2 Button Remote
LCR Transmitter 030210 2 Button Remote Setup: (It is recommended that the dipswitch code be changed from the default factory setting) 1. Open the battery compartment door and locate the dipswitches. 2. Change the dipswitches to the settings you prefer, record for future reference Transmitter Left Button to Receiver Programming: (standard Open/Stop/Close function) Press and hold the left transmitter button down. Red light on transmitter should be on. On the receiver, push the P1 push-button until the green LD light comes on. Release both buttons. Transmitter left button to receiver programming is complete
$19.50