500017 US Automatic Patriot RSL Control Board - Yellow - 2-Conductor Motor Cable
The US Automatic 500017 is a yellow Patriot RSL slide gate operator control board used on Patriot RSL systems equipped with the 2-conductor motor cable style. It is the main logic board that manages slide gate opening and closing commands, limit input behavior, accessory inputs, battery/solar charging logic, current-sense obstruction response, and monitored external entrapment protection. In the field, this board is typically replaced when a Patriot RSL slide operator has a confirmed control-board failure, burned or damaged terminals, intermittent relay behavior, failed accessory input response, unexplained diagnostic LED behavior, or board damage from moisture, insects, surge events, or age. The most important ordering detail is the motor cable configuration. US Automatic separates Patriot RSL yellow board service parts by motor harness type, and the 500017 is for the 2-conductor motor-cable version. Do not substitute it for the 500026 board unless the motor wiring and operator configuration match the 4-conductor version requirements.
Compatible With
This compatibility list is based on known US Automatic Patriot service-part usage and should be verified against the original operator label, actuator parts diagram, and existing part number before ordering.
- Select US Automatic Patriot RSL slide gate operators using the 2-conductor motor cable configuration
- Single Patriot RSL slide gate installations when the operator parts diagram calls for 500017
- Dual Patriot RSL slide gate installations where the board version and wiring match
- 12VDC Patriot RSL battery/solar operator systems using the proper monitored safety devices
- Patriot RSL systems requiring two monitored external entrapment devices as specified by the operator manual
Also Known As / Related Part Numbers
- 500017
- US-500017
- USA 500017
- 500017 Patriot RSL control board
- yellow Patriot RSL board
- Patriot RSL board for 2-conductor motor cable
- 2 conductor Patriot RSL control board
- 500026 related 4-conductor version - not interchangeable unless motor wiring matches
- 500016 related Patriot swing/RSL board family - verify application before substitution
Features & Specifications
| Manufacturer | US Automatic |
|---|
| Product Type | Patriot RSL slide gate control board |
|---|
| Part Number | 500017 |
|---|
| Application | Replacement main control board for select Patriot RSL slide gate operators |
|---|
| Compatible Operator Type | Patriot RSL slide gate operator with 2-conductor motor cable |
|---|
| Voltage | 12VDC operator system; verify battery, charger, and transformer/solar configuration |
|---|
| Safety Monitoring | Requires monitored entrapment protection devices as specified by the operator manual |
|---|
| Included Components | Control board only unless the listing states otherwise |
|---|
| Notes | Do not confuse with 500026 for 4-conductor motor cable applications |
|---|
Technician Note
This is a motor-harness-specific Patriot RSL board. Check the old board label and count the motor cable conductors before ordering. A 2-conductor motor board and a 4-conductor motor board should not be swapped by board color alone.
Before Ordering Checklist
- Confirm the existing operator is a Patriot RSL slide gate operator, not a Patriot swing, Ranger, or Ranger HD system.
- Confirm the motor cable uses the 2-conductor configuration.
- Verify the old board part number or service documentation references 500017.
- Inspect safety-device wiring and confirm the required monitored entrapment devices are installed and functional.
- Inspect for external causes of board failure, including water intrusion, insect damage, battery issues, lightning/surge damage, or shorted accessory wiring.
Professional Advisory
Control-board replacement should be performed with power disconnected. If the gate has missing safety devices, unsafe movement, damaged wiring, or repeated board failures, have the system inspected by a qualified gate technician before returning it to service.
Product Questions & Answers
Is 500017 the same as 500026?
No. 500017 is used for Patriot RSL slide operators with a 2-conductor motor cable, while 500026 is for Patriot RSL operators with a 4-conductor motor cable. Match the motor harness before ordering.
Does this board work on a Patriot swing gate opener?
This listing is written for the Patriot RSL slide gate operator application. Patriot swing gate systems use different board references, so the original board part number should be verified.
Why does this board mention monitored devices?
Patriot RSL systems using this board require monitored external entrapment protection devices as specified by the operator manual and UL 325 requirements.
What should I check before replacing the board?
Check the motor cable style, board part number, battery condition, charger output, accessory wiring, limit wiring, and safety devices before replacing the control board.
Can a damaged accessory cause the new board to fail?
Yes. Shorted photo eyes, loops, keypads, receivers, or damaged wiring can cause repeat problems. Disconnect power and correct wiring faults before installing the replacement board.
