| Products (Total Items: 4) |
|
|
|
|
| |
|
 |
MMTC 60-2730 30ft Nema 4 Exterior Retro-reflective Photocell, 110V5764 |
| Exterior Retro-reflective Photocell, Voltage: 110V AC, Sensing Distance=30 Feet, Comes with Bracket and Reflector, NEMA 3, 4, 4X, 6P & 13 Set Dark Switch to Dark ON. Set Sensitivity near Max. Yellow LED indicates that the unit is receiving power. Loosely Mount Photo Eye. Solidly Mount Reflector, level or square with and aimed at the Photo Eye’s Lens. Adjust Photo Eye until Red LED is steady. Then tip Up & Down and Side to Side, until Red LED goes out. This will determine the four outer most limits of aim. Go to center in both directions (Horizontal & Vertical Center.) Hold in this spot & tighten. Tap on the Photo Eye mount to test stability and accuracy. |
|
|
 |
Replacement Reflector for Safety Sensors Photo Eyes - Ormon, EMX, Seco-Larm5909 |
| Replacement Reflector for Safety Sensors Photo Eyes - Ormon, EMX, Seco-Larm Reflector features retroreflector prisms that automatically return a beam in the same direction it originated. It is designed for use with retroreflective photoelectric sensors. Use in Safety Senors for Gate Openers in Residential and Commercial Applications, packaging, handling, assembly, conveying, and food and beverage facilities. |
|
|
|
| |
|
|
|
