BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 100' Lead

Write a Review

PRICE $213.31

BD Saw Cut Loops are used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the groove. Custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.

Part Number: BD-SC-36-100

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description
Spec Sheet
Manual

BD Loops: Preformed 3/16 Saw-cut Loop

Used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove.

The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.

What makes BD Loops design superior?

Feature	Benefits
Thicker 16-gauge loop wire, most other use thinner 18 gauge.	More copper means a better performing detector and increased tensile strength.
LLDPE outer jacket material. Same material as used in XLP.	Tough abrasion resistance jacket will assure top loop performance.
Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod)	Eliminates the need for a backer rod to hold loop to the bottom of saw-cut groove. No chance of air pockets and use 40% less sealant since bottom half of the groove is completely sealed.
Easy to follow instructions with template for dog-ear corner cut.	Takes confusion out of the installation process.
Pre-phased at the factory.	Saves time when installing two loops to one detector for a slide or vertical gate.
Loop wire jacket and lead-in jacket are the same size.	No need to make a second saw-cut for lead-in run.
Soldered connections.	Ensure top performance.
Pre tested at factory 3 ways.	Tested with meg-ohm meter, inductance meter, and with an actual loop detector.
Optional installation kits: TB-KIT and PR-3/16.	Tools to make the job easier, eliminates making the wrong sized cut by using the loop itself as a template for chalking lines.
Compact size and reduced weight.	Saves on shipping cost and warehouse space.

BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 100' Lead

Recently Viewed Items