My Account  |  0 item(s)    View Cart
Home > Loop Wire > BD Loops > BD Saw Cut Loops
BD Loops - Exit Loop  - 6' X 12'  Saw Cut Performed Loops with 50' Lead
BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 50' Lead
Email a friend Email a friend
Add to Wish List Add to Wish List
Share |

BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 50' Lead

Item Id: BD-SC-36-50
Review this item Review this item
Your Price: $158.03
Quantity
Description

BD Loops: Preformed 3/16 Saw-cut Loop

Used for saw-cut installations where a 3/16 groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface.

Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16 saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove.

The entire loop including the lead-in fits within a 3/16 saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.

What makes BD Loops design superior?
 
Feature Benefits
Thicker 16-gauge loop wire, most other use thinner 18 gauge. More copper means a better performing detector and increased tensile strength.
LLDPE outer jacket material. Same material as used in XLP. Tough abrasion resistance jacket will assure top loop performance.
Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod) Eliminates the need for a backer rod to hold loop to the bottom of saw-cut groove. No chance of air pockets and use 40% less sealant since bottom half of the groove is completely sealed.
Easy to follow instructions with template for dog-ear corner cut. Takes confusion out of the installation process.
Pre-phased at the factory. Saves time when installing two loops to one detector for a slide or vertical gate.
Loop wire jacket and lead-in jacket are the same size. No need to make a second saw-cut for lead-in run.
Soldered connections. Ensure top performance.
Pre tested at factory 3 ways. Tested with meg-ohm meter, inductance meter, and with an actual loop detector.
Optional installation kits: TB-KIT and PR-3/16. Tools to make the job easier, eliminates making the wrong sized cut by using the loop itself as a template for chalking lines.
Compact size and reduced weight. Saves on shipping cost and warehouse space.
 

Recently Viewed Items
Browse Similar Items