OPERATION
The Diablo DSP-6LP vehicle detector is designed for solar powered gate applications. This loop detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate the detector is operating in the low power mode.
The Diablo DSP-6LP detector beats all competition for reliability, simplicity, and no car current consumption. This series of Diablo Loop detectors are covered by United States patent number US 7,132,959 Non-Interfering Vehicle Detection . These detectors are virtually crosstalk free in most applications.
Working on battery-powered and other parking and access control loop applications, the Diablo DSP-6LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency.
This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the Diablo Control DSP-6LP HYPERTRACK software. Environmental conditions are constantly compensated with the DML-9LP s HYPERTRACK software.
FEATURES
Loop Size - Works on any in-ground inductive loop from 20 to 1200 mH.
Indicators - Separate Power and Detect LED s. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
Sensitivity - Automatic - compensates for large loops and large lead-ins.
Output Ratings - Single output, 1 amp relay at 30 VDC
Resistive - The relay common, NO, and NC contacts are available.
Ordering Information DSP-6LP standard version.
Power - 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop.
Size - Height: 1.52 Width: 2.9 Depth: 1.56
Connector - Removable 7-pin terminal block. Pin assignments are shown below -from left to right:
1 - Relay (NC) (opens for detect)
2 - Relay Common
3 - Relay (NO) (closes for detect)
4 - Power Common
5 - Power in (10 to 30 Volts AC or +DC)
6 - Loop
7 - Loop
Operating Temperature -35°F to 165°F (-37°C to 74°C)
