-system_thumbnail.jpg&maxx=150&maxy=0) |
Diablo Controls DSP-13 75ft Tri-Axis Detection (TRIAD) System Fail Safe/Secure1307 |
The DSP-13 75ft Tri-Axis Detection (TRIADTM) System is designed to be an accurate, reliable, and easy to install detection system. The system is comprised of two parts, a master unit (DSP-13M) and a sensor (DSP-13S). The advanced sensor s small size and high sensitivity make it ideally suited to vehicle detection applications. The detection area of the DSP-13 ranges from a 3' x 3' to 15' x 15'; based upon the Sensitivity setting on the front panel. |
Availability: Not for Sale |
|
|
 |
Diablo Controls DSP-20LV Dual Channel Vehicle Detector Directional Logic Control1308 |
The DSP-20 is a dual channel vehicle detector with built-in directional logic controls. Front panel switches allows the user to select between two independent channels or directional logic mode. The DSP-20 is a dual channel detector that uses advanced channel scanning technology to provide superior noise tolerance. The scanning technology allows for placement of loops closer together (even overlapping) than ever possible with single channel detectors. |
|
|
-system_thumbnail.jpg&maxx=150&maxy=0) |
Diablo Controls DSP-13 100ft Tri-Axis Detection (TRIAD) System Fail Safe/Secure1309 |
The DSP-13 100ft Tri-Axis Detection (TRIADTM) System is designed to be an accurate, reliable, and easy to install detection system. The system is comprised of two parts, a master unit (DSP-13M) and a sensor (DSP-13S). The advanced sensor s small size and high sensitivity make it ideally suited to vehicle detection applications. The detection area of the DSP-13 ranges from a 3' x 3' to 15' x 15'; based upon the Sensitivity setting on the front panel. |
Availability: Not for Sale |
|
|
 |
Diablo Controls AVI-40, Receiver Hands-Free Automatic Vehicle Identifier System1310 |
The AVI System has many different uses and applications including Emergency Vehicle Access, Mass Transit, Shuttle Buses, Private Homeowner Access, Trucking Companies, Manufacturing Facilities, Fork Lifts, Airport Access, Rail Cars, and many other types of applications. Depending on the type of application, the user can choose to have the AVI System "Hands Free" or manual. |
Availability: Not for Sale |
|
|
|
 |
Diablo Controls AVI-100-R-LV Low Voltage, Single or Dual Code Receiver Vehicle1312 |
The AVI System has many different uses and applications including Emergency Vehicle Access, Mass Transit, Shuttle Buses, Private Homeowner Access, Trucking Companies, Manufacturing Facilities, Fork Lifts, Airport Access, Rail Cars, and many other types of applications. |
|
|
 |
Diablo Controls AVI-100-R-117 (117 AC Power, Single or Dual Code Receiver)1313 |
The AVI System has many different uses and applications including Emergency Vehicle Access, Mass Transit, Shuttle Buses, Private Homeowner Access, Trucking Companies, Manufacturing Facilities, Fork Lifts, Airport Access, Rail Cars, and many other types of applications. |
|
|
 |
Diablo Controls AVI-X-1 Transmitter Single Code Hands-Free Automatic Vehicle1314 |
The AVI System has many different uses and applications including Emergency Vehicle Access, Mass Transit, Shuttle Buses, Private Homeowner Access, Trucking Companies, Manufacturing Facilities, Fork Lifts, Airport Access, RaiL Cars, and many other applications. Depending on the type of application, the user can choose to have the AVI System "Hands Free" or manual. |
|
|
 |
Diablo Controls AVI-X-2 Transmitter Dual Code Hands-Free Automatic Vehicle1315 |
The AVI System has many different uses and applications including Emergency Vehicle Access, Mass Transit, Shuttle Buses, Private Homeowner Access, Trucking Companies, Manufacturing Facilities, Fork Lifts, Airport Access, RaiL Cars, and many other applications. Depending on the type of application, the user can choose to have the AVI System "Hands Free" or manual. |
|
|
 |
Diablo Controls AVI-222 2-channel Card Receiver Automatic Vehicle Identification1316 |
The AVI-222 Automatic Vehicle Identification (AVI) Receiver is a two channel card-rack type receiver and fits in a standard 222 rack. It detects and identifies vehicles equipped with the Diablo Controls AVI transmitters. The AVI-222 uses two loops (one per channel) installed in the roadway surface to receive the transmitter's code. Each receiver channel operates independently and identifies all 19,683 codes. Each channel can be programmed to set any code as either valid or invalid. Valid codes activate the appropriate Solid State Output and LED Indicator. |
|
|
|
|
|
 |
Diablo Controls DSP-21-LV-R Series, Directional Logic Counting Detector4691 |
The DSP-21 Series is intended to be an ‘all-in-one’ vehicle detector designed for the parking industry. The DSP-21 Series Detector was developed for systems that need accurate vehicle count information. This detector is designed to operate utilizing a dual inductive loop configuration typical in the parking industry. The small packaging comes without sacrificing performance. |
|
|
 |
Diablo Control XLP-8 Extreme Low Power Vehicle Detector5918 |
The XLP-8 is specifically designed as a small, simple to use, extremely low current draw, vehicle detector capable of using an inductive loop or a magnetometer sensor (a.k.a. Mini-Loop or Probe). The extremely low power use, less than 1 milliamp, makes this detector ideal for solar and battery backed-up applications. The XLP-8 can be connected to a standard inductive loop or one of Diablo Controls magnetometer based probes. The Diablo Controls probe is a small “pipe shaped” device approximately 4-1/2” by 1” and is designed to be buried in the ground to detect vehicles. If the probe function is turned on, the detector cannot be used as an obstruction or safety detector as there is no presence detection in this mode of operation. The XLP-8 has 1 amp rated relay contact outputs. Both Normally-Open and Normally-Closed contacts are provided. The XLP-8 has 9 selectable sensitivity settings and uses a 4-position DIP switch to configure the detector. This includes the magnetometer probe selection as well as sensitivity boost, fail-safe or fail-secure operation, and operating frequency. This makes the XLP-8 flexible enough to deal with most installations. |
|
|
 |
Diablo Controls DML- 9LP Probe Kit Vehicle Loop Detector5964 |
The Diablo DML-9LP vehicle sensor kit is designed for solar powered gate applications. This detector will operate on any voltage from 10 to 30 volts AC or DC and draws approximately 3 milliampere while waiting for a vehicle. The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The Diablo DML-9LP probe beats all competition for reliability, simplicity and “no car” current consumption. This series of Diablo loop detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”. These detectors are virtually crosstalk free in most applications. Working on battery-powered and other parking and access control loop applications, the Diablo DML-9LP is preset to the normal sensitivity level used in parking/access control applications and tunes itself to the best operating frequency. Environmental conditions are constantly compensated with the Diablo DML-9LP’s HYPERTRACK software. FEATURES Indicators - Separate Power and Detect LED’s. The GREEN Power LED will wink continuously once per second under normal operation. The RED Detect LED will turn on solid for a vehicle. Sensitivity - Automatic - compensates for extra long lead-ins. Probe Failure - The GREEN power indicator flashes twice per second if the probe circuit is open and 10 times per second if the probe circuit is shorted. This detector operates in the fall secure mode and will not output a “Detect” for either of these probe failure conditions. This “Fail secure” detector should be used on “free exit” loops. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Power - 10 to 30 Volts D.C. Approximately 3mA (no car on probe) and less than 25mA with car on the probe. Size - Height 1.52” Width 2.9” Depth 1.56” Connector - Removable 7-pin terminal block. Pin assignments are shown at right below. |
|
|
 |
Diablo Controls DSP-50 Probe Kit Vehicle Loop Detector Road Traffic Control5965 |
The Diablo DSP-50 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. This device will work when connected to an embedded street loop or, (with a switch setting) the device will operate with a Mini-Loop available from Diablo Controls. The Diablo Controls Mini-Loop is a small ipipe shapedi device-approximately 5" by 3/4” and is designed to be buried in the ground to detect vehicles. The Diablo DSP-50 that comes with this kit when attached to the Probe MUST ONLY BE USED AS A FREE EXIT DEVICE as it gives a pulse output only. SENSITIVITY SWITCH This detector has a 10 position rotary sensitivity switch. The unit is shipped in the “5”position which is the normal sensitivity level. Sensitivity can be adjusted up and down from this level to accommodate different street loops or “MiniLoops”. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Power - 10 to 30 Volts D.C. ( 30 Ma. Max at 12 Volts) Enclosure - Impact resistant, high temperature plastic. H - 2.375i (60.4 mm) W n 0.86i (22 mm) D -2.25 i (58mm) |
|
|
 |
Diablo Controls DSP-6LP Microdetector Vehicle Loop Detector571 |
Our low power detector has been re-designed to be used on any voltage and either polarity from 10 to 30 Volts AC or DC. This low power vehicle detector is perfect for solar powered gate installations. This detector beats all competition for current consumption. Works on all gate and access control applications that require extremely low current draw from a solar powered gate installation. The 6LP detector is " fail-secure", and should be used on free exit loops. |
|
|
 |
Diablo Controls DSP-7LP Microdetector Vehicle Loop Detector572 |
Our low power workhorse, the DSP-7LP, has set a new standard for access and parking detectors. This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 10 and 30 volts - AC or DC!!! The DSP-7LP vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications. The 7LP detector is "fail-safe", and should be used on all safety loops. |
|
|
 |
Diablo Controls DSP-7 Microdetector Vehicle Loop Detector573 |
This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 10 and 30 volts - AC or DC!!! The DSP-7 vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications. The DSP-7 detector is "fail-safe", and should be used on all safety loops. |
|
|
 |
Diablo Controls DSP-10 Parking Detector Vehicle Loop Detector582 |
The DSP-10 (11 Pin Base) vehicle detector has been designed to handle all access control, drive-through, and parking, applications. It can be used on entrance loops, safety loops, or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either "fail safe" or "fail secure," it is the only parking detector you will ever need. |
|
|
 |
Diablo Controls DSP-10-117 Parking Detector Vehicle Loop Detector585 |
The DSP-10 (11 Pin Base) vehicle detector has been designed to handle all access control, drive-through, and parking, applications. It can be used on entrance loops, safety loops, or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either "fail safe" or "fail secure," it is the only parking detector you will ever need. |
|
|
 |
Diablo Controls DSP-11-LV Microdetector Vehicle Loop Detector584 |
Diablo Controls has been listening! We now offer a complete line of simple, switchless, single output vehicle detectors available with the industry standard 11-pin base. Three models for your complete 11-pin vehicle detector needs: The DSP-11- LV which will operate on any voltage from 10 to 30 volts - AC or DC. Use the DSP-11- 117 for 117 VAC or the DSP-11- 230 for 230 VAC. |
|
|
 |
Diablo Controls DSP-11-117 Microdetector Vehicle Loop Detector574 |
Diablo Controls has been listening! We now offer a complete line of simple, switchless, single output vehicle detectors available with the industry standard 11-pin base. Three models for your complete 11-pin vehicle detector needs: The DSP-11- LV which will operate on any voltage from 10 to 30 volts - AC or DC. Use the DSP-11- 117 for 117 VAC or the DSP-11- 230 for 230 VAC. |
|
|
 |
Diablo Controls DSP- 40S Plug-in Vehicle Loop Detector575 |
A plug-in detector which now has 4 levels of sensitivity. The DSP-40S detector will add a new dimension of simplicity to your plug-in detector requirements.This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "Detect" and the "Fail" outputs. |
|
|
 |
Diablo Controls DSP- 50 Plug-in Vehicle Loop Detector576 |
A plug-in detector which now has 9 levels of sensitivity and duel relays. The DSP-50S detector will add a new dimension of simplicity to your plug-in detector requirements as it can operate as a loop detector but with the flip of a switch it can operate our probe in pulse mode. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "A and B relayl" outputs. |
|
|
 |
Diablo Controls DSP-55-75ft, Mini Loop Kit, 75'4693 |
A plug-in detector which now has 9 levels of sensitivity and duel relays. The DSP-50S detector will add a new dimension of simplicity to your plug-in detector requirements as it can operate as a loop detector but with the flip of a switch it can operate our probe in pulse mode. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "A and B relayl" outputs. |
|
|
 |
Diablo Controls DSP-55-100ft, Mini Loop Kit, 100'4694 |
A plug-in detector which now has 9 levels of sensitivity and duel relays. The DSP-50S detector will add a new dimension of simplicity to your plug-in detector requirements as it can operate as a loop detector but with the flip of a switch it can operate our probe in pulse mode. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "A and B relayl" outputs. |
|
|
 |
Diablo Controls DSP- 55 Plug-in Vehicle Loop Detector4685 |
A plug-in detector which now has 9 levels of sensitivity and duel relays. The DSP-50S detector will add a new dimension of simplicity to your plug-in detector requirements as it can operate as a loop detector but with the flip of a switch it can operate our probe in pulse mode. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "A and B relayl" outputs. |
|
|
 |
Diablo Controls DSP-50 Probe Kit Vehicle Loop Detector - 75'1111 |
This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity. This detector operates between 10 and 30 volts AC or DC. |
|
|
 |
Diablo Controls Exit Probe 75' Mini Free Exit - ONLY - No Detector is included8921 |
This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity. This detector operates between 10 and 30 volts AC or DC. |
|
|
 |
Diablo Controls Exit Probe 100' Mini Free Exit - ONLY - No Detector is included 8922 |
This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity. This detector operates between 10 and 30 volts AC or DC. |
|
|
 |
Diablo Controls DSP-50 Probe Kit Vehicle Loop Detector - 100ft577 |
This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity. This detector operates between 10 and 30 volts AC or DC. |
|
|
|
|
|
|
 |
Diablo Controls DSP-15T Parking/Access Control Detector Vehicle Loop Detector581 |
The DSP-15 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. Working on virtually any size loop, the DSP-15 automatically tunes itself to the best operating frequency within the selected range. Environmental conditions are constantly compensated with the DSP-15 s HYPERTRACK software. The DSP-15 s inherent noise filtering algorithms allow it to work reliably in any electrical situation. It can be used as either a safety loop or free exit loop detector. With the flexibility to be either fail safe or fail secure, it is the only parking detector you will ever need. |
|
|
 |
Diablo Controls DSP-15F Parking/Access Control Detector Vehicle Loop Detector4684 |
The DSP-15 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. Working on virtually any size loop, the DSP-15 automatically tunes itself to the best operating frequency within the selected range. Environmental conditions are constantly compensated with the DSP-15 s HYPERTRACK software. The DSP-15 s inherent noise filtering algorithms allow it to work reliably in any electrical situation. It can be used as either a safety loop or free exit loop detector. With the flexibility to be either fail safe or fail secure, it is the only parking detector you will ever need. |
|
|