My Account  |  0 item(s)    View Cart
Home > Vehicle Detectors > EDI Loop Detectors
EDI LMA-1150 Inductive Loop Vehicle Detector, EDI LMA-1150-HV Exit Loop Detector
EDI LMA-1150 Inductive Loop Vehicle Detector, Exit Loop Detector
Email a friend Email a friend
Add to Wish List Add to Wish List
Share |

EDI LMA-1150 Inductive Loop Vehicle Detector, EDI LMA-1150-HV Exit Loop Detector

Item Id: EDI-LMA-1150-HV
Review this item Review this item
Your Price: $99.00
EDI LMA-1150 Inductive Loop Vehicle Detector, Exit Loop Detector

Click Here For Interactive LMA-1250 Demonstration 

(This interactive demo requires Macromedia Flash capability to be installed on your computer.)



The front panel 7-segment LED DEFLECTOMETERTM provides visual feedback and assistance for setting the correct sensitivity, reading the frequency of the loop, reporting Loop Faults, and indicating Delay & Extension Timing functions.

Sensitivity Meter:

With a typical size vehicle over the roadway loop, the DEFLECTOMETERTM functions as a Sensitivity Meter. The optimum sensitivity setting should provide a reading of 5 . You can adjust the DEFLECTOMETERTM reading by using the front panel UP or DOWN sensitivity buttons. Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles, including motorcycles and high-bed vehicles.

Frequency Meter:

Following power-up or reset, the DEFLECTOMETERTM will indicate a 2 or 3 digit number (quickly flashes) that indicates the loop frequency of the loop & loop network. Keeping your loops separated by at least 5 KHz avoids crosstalk problems and future service calls.

Ten (10) Levels of Sensitivity:

10 levels of sensitivity (0 to 9) can be easily set using the front panel UP or DOWN push buttons.

Two Models Cover ALL Voltages:

LMA-1150-LV operates on 12VDC, 24VDC, and 24VAC LMA-1150-HV operates on 120VAC and 240VAC

Advanced Loop Diagnostics:

The Loop Fault Monitor continually checks the integrity of the loops and will report and store three types of loop faults; Open Loops, Shorted Loops, and 25% sudden changes in inductance.

Loop Fault Memory:

The Loop Fault Memory uses internal Non-Volatile memory to store and display the current and previous loop faults utilizing the front panel Loop Fault LED and DEFLECTOMETERTM. A power loss or reset will not delete this memory. A MUST FOR TROUBLESHOOTING!

Call Output Memory:

The detector will not drop a Call state if power is lost for a minimum of 4 seconds or less.

Delayed & Extended Detection:

A 2-second CALL Delay time and 2, 5, or 10-second CALL Extension time can be provided.


?Automatic Tuning - Lightning & Surge Protection - Four (4) Frequency Levels- Compatible with ALL radio controls & remote openers - Sensitivity Boost -Fail Safe and Fail Secure Configurations - Separate Color-Coded LED indicators- Wide Loop Inductance Range: 20 to 2500 micro Henries.

Recently Viewed Items
Browse Similar Items