Product Overview
The HBP4XL bracket kit is the heavy-duty bracket package used with select GTO and Linear Pro 4000 series swing gate operator installations. The bracket set controls the relationship between the gate post, pivot point, actuator arm, gate leaf, and closed-position stop. This geometry is critical on heavy or long swing gates because a wrong bracket, incorrect pivot spacing, or missing stop plate can create binding, limit problems, poor leverage, or premature arm wear. HBP4XL is commonly associated with SW4000XL/SW4000XLS applications and related dual-gate systems such as SW4200XL/SW4200XLS when the same bracket layout is used. Older references describe it as an upgrade kit for larger and longer 4000XL gates, while some newer 4000XLS packages include heavy-duty mounting hardware as standard. This kit is best ordered when a complete bracket group is needed instead of only one damaged bracket.
Compatible With
- Select GTO / Linear Pro SW4000XL swing gate operator installations
- Select GTO / Linear Pro SW4000XLS swing gate operator installations
- Select GTO / Linear Pro SW4200XL and SW4200XLS dual swing gate systems when each leaf requires the matching 4000 series bracket set
- Commonly associated with heavy-duty 4000 series applications up to 20 ft and 1000 lb when installed according to the applicable manual and gate conditions
- May be related to HB4000 bracket set references depending on supplier terminology
- Verify pull-to-open versus push-to-open layout; push-to-open applications may require different bracket hardware
Features and Specifications
| Manufacturer | GTO / Linear Pro |
|---|
| Product Type | Heavy-duty bracket kit / bracket set |
|---|
| Part Number | HBP4XL |
|---|
| Application | Mounting hardware for select 4000 series swing gate operator arms |
|---|
| Compatible Operator Type | Select heavy-duty actuator swing gate operators |
|---|
| Included Components | Post bracket, pivot bracket, gate bracket, stop bracket or bracket hardware group depending on packaging |
|---|
| Gate Capacity Note | Commonly associated with 4000XL upgrade references up to 20 ft and 1000 lb when all installation requirements are met |
|---|
| Notes | Not the same as a single R4KGATE, R4KPOST, R4KPIVOT, R4KSTOP, or H401P hardware bag |
|---|
Also Known As / Related Part Numbers
- HBP4XL
- HBP-4XL
- LIN-HBP4XL
- GTO HBP4XL
- Linear HBP4XL
- HB4000
- HB4000 bracket set
- R4KGATE related gate bracket
- R4KPOST related post bracket
- R4KPIVOT related pivot bracket
- R4KSTOP related stop plate
- H401P related hardware bag
Technician Note
The bracket set must be installed to the operator manual measurements, not just where old holes happen to be. Reusing incorrect holes from a previous operator can create poor leverage and limit problems even with the correct kit.
Before Ordering Checklist
- Confirm the operator is a 4000XL, 4000XLS, 4200XL, or 4200XLS related system
- Check whether the installation is pull-to-open or push-to-open
- Verify the kit is needed instead of a single replacement bracket
- Measure gate length and weight and confirm the gate moves freely by hand
- Inspect the gate post and gate frame for strength before installing new hardware
Professional Advisory
A bracket kit cannot compensate for a sagging, undersized, or wind-loaded gate. Correct structural gate issues and safety-device requirements before returning the operator to service.
Important Ordering Warnings
- Do not substitute smaller 2000/3000 series brackets for a 4000 series heavy-duty bracket layout.
- Push-to-open installations may require a different bracket arrangement than the standard bracket set.
Product Questions and Answers
What is included with HBP4XL?
HBP4XL is commonly sold as a heavy-duty bracket kit or bracket set for select 4000 series GTO/Linear swing operators. Packaging can vary, so confirm the included post, pivot, gate, and stop components with the listing.
Which operators commonly use HBP4XL?
It is commonly associated with select SW4000XL, SW4000XLS, SW4200XL, and SW4200XLS operator installations when the 4000 series bracket geometry is required.
Is HBP4XL only an upgrade kit?
Older references often describe it as an upgrade for larger 4000XL gates, while some later 4000XLS packages include heavy-duty mounting hardware. Use the parts diagram for the operator being serviced.
Can I use HBP4XL for a push-to-open gate?
Do not assume it will work for push-to-open. Push-to-open installations may require different bracket hardware or layout, depending on the operator manual.
Why replace the whole bracket kit instead of one bracket?
A complete kit is useful when several bracket pieces are bent, missing, mismatched, or when the current installation geometry is wrong. If only one correct bracket is damaged, a single service bracket may be enough.
[ITEMPRICE]