GTO Linear Pro R5211 R4211 PCB3040 Green Control Board for Swing Gate Openers
The R5211 / R4211 PCB3040 control board is the main logic board used in select GTO, Linear Pro, and Mighty Mule swing gate opener control boxes. It manages the gate cycle, receiver input, limit behavior, push-to-open or pull-to-open setup, battery charging interface, and accessory terminals for safety and access control devices. When this board fails, the operator may stop responding, click without running, run only one direction, lose receiver function, or show inconsistent battery and charging behavior.
Because GTO and Mighty Mule model names have changed over time, board matching should be done by the actual board number and operator family, not by appearance alone. Green, red, and blue board references are commonly searched, but color alone is not enough to confirm fitment. Connector layout, terminal markings, single versus dual configuration, and operator generation all matter.
Compatible With
Commonly associated with select GTO, Linear Pro, and Mighty Mule swing gate operator families that call for the R5211 / R4211 / PCB3040 style board.
- Mighty Mule FM500 single swing gate opener series
- Mighty Mule FM502 dual swing gate opener series
- Mighty Mule MM560 and MM562 series where R4211/R5211 board is specified
- GTO / Linear Pro PRO-SW2500 and PRO-SW2502
- GTO / Linear Pro PRO-SW3000XL and PRO-SW3200XL
- GTO / Linear Pro PRO-SW4000XL and PRO-SW4200XL
- GTO / Linear Pro 2000XL, 3000XL, and 4000XL swing gate opener families when confirmed by parts diagram
- Commonly associated with control box parts for FM500/FM502 and PRO XL swing operators
- Not compatible with FM200, FM350, FM352, MM260, MM360, and other control boxes that use different board generations unless a documented conversion applies
Features & Specifications
| Manufacturer | Linear / GTO / Mighty Mule |
|---|
| Product Type | Replacement gate opener control board |
|---|
| Part Number | R5211 |
|---|
| Related Board Numbers | R4211, PCB3040 |
|---|
| Application | Swing gate opener control box electronics |
|---|
| Compatible Operator Type | Select battery-backed single and dual swing gate operators |
|---|
| Configuration | Used in supported push-to-open and pull-to-open installations when set up correctly |
|---|
| Safety Monitoring | Verify monitored safety requirements by operator generation and local code |
|---|
| Notes | Board color and appearance are not enough to confirm compatibility |
|---|
Also Known As / Related Part Numbers
- R5211
- R4211
- PCB3040
- GTO R5211
- GTO R4211
- Mighty Mule R4211
- Linear Pro R5211
- PCB 3040
- PRO3040-G3 reference
- FM500 control board
- FM502 control board
- SW3000XL control board
- SW4000XL control board
Technician Note
Before replacing the board, inspect the battery, transformer, fuse, terminal wiring, receiver, and accessory inputs. A shorted accessory wire or weak battery can make a good board appear defective.
Before Ordering Checklist
- Match the printed board number or service part number.
- Confirm the gate operator model and single or dual configuration.
- Photograph all wiring before removing the old board.
- Check for water damage, insect damage, burnt terminals, or shorted accessory wiring.
- Confirm safety devices and receiver wiring after replacement.
Important Ordering Warnings
Do not use board color alone to select this item. Some similar-looking GTO and Mighty Mule boards are not interchangeable, and the FM350/FM352/MM360 style operators are a common mismatch risk.
Professional Advisory
Control board replacement involves low-voltage wiring, battery power, and safety-device terminals. If the gate moves unpredictably, has missing safety devices, or has damaged wiring, have a qualified gate technician service the system.
Product Q&A
Is R5211 the same as R4211?
They are commonly searched together and associated with the PCB3040 replacement board family, but the original board number and operator model should still be verified.
Will this board work on an FM500 or FM502?
It is commonly associated with FM500 and FM502 systems when the existing control box uses the R4211/R5211 style board.
Will this fit an FM350 or FM352 opener?
No. FM350, FM352, MM260, and MM360 style systems are commonly listed as not compatible with this board family.
Do I need to reprogram remotes after replacing the board?
In many cases remote and accessory setup must be checked or reprogrammed after board replacement.
What should be checked before blaming the control board?
Battery condition, transformer output, fuses, receiver wiring, accessory shorts, and water damage should be checked before replacing the board.