 |
GTO R4222 Photo Beams - Through Beam - 12v - Non Contact System68 |
| GTO R4222 PhotoEye - PhotoBeam - Obstruction Sensing Device. GTO PRO R4222 Photo Beams - Through Beam - 12v - Non Contact System. Safety Photo Beams For Gate Openers. The GTO photo eyes are a valuable safety feature that will keep the gate from closing when any obstruction is in the path of the photoelectric beam. The photo eyes use Dual Beam and Through Beam technology, which are more reliable than reflective beams because they do not allow sunlight to create a false reading . |
|
|
|
|
 |
Sentry 300 Photo Eye Kit 550012961 |
| The Photo Eye Kit 550012 is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection |
|
|
|
|
|
|
_thumbnail.jfif&maxx=150&maxy=0) |
Liftmaster LMRRUL Monitored Retro Reflective Photo Eye1193 |
| With a long-range sensing distance, the Monitored Retro-Reflective Photo Eye (LMRRU) delivers a more versatile solution in almost any application. Integrated diagnostics with our 2016 UL 325 Gate Operators. Easy to install and align with LED indicators. Solar optimized, turns off when gate operator is idle. LiftMaster s full line of safety entrapment protection accessories are tested and proven to work together with our gate operators as a complete UL 325 compliant system. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Liftmaster CPS Commercial Protector System2451 |
| The Commercial Protector System® provides protection on doors up to 45 feet wide. Contains emitter, receiver, mounting brackets, and operator interface. 24VAC, use CPS-L if Solid State Logic 3 or Medium-Duty Logic Control Board unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Wayne Dalton 252118 Safety Sensors Set - Infrared Beam for Garage Openers5575 |
| Wayne Dalton 252118 Safety Sensors Set - Infrared Beam for Garage Openers Features: Compatible with all Wayne Dalton Listed Below: Quantum models (3211, 3212, 3213, 3214, 3312, 3313, 3314, 3316, 3412, 3414); ProDrive models (3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B, 3220C-Z, 3221C-Z, 3222C-Z, 3224C-Z, 3320B-Z, 3322B-Z, 3324B-Z); Classic Drive models (3012, 3014, 3016, 3018, 3018DLX, 3512, 3514, 3522, 3522DLX); iDrive models (3660-372, 3661-372, 3662-372, 3760-372, 3751-372, 3651-372, 3750-372, 3790-372, 3790-Z); Doormaster models (BDOR-2000, BIRW-2000); and Wizard models (2113, 2115) |
|
|
 |
EMX IRB-EXP EXPLOSION-PROOF PHOTOEYE 115FT RANGE THRU BEAM SAFETY OPEN SENSORS5592 |
| Designed for explosive environments, the rugged IRB-EXP explosion proof photo beam is used as a safety, reversing, or opening device in conjunction with automatic operators. The IRB-EXP explosion proof photo beam sensor features a 24° sensing angle for easy installation and alignment and 115-ft. operating range. The lens-less design of the IRB-EXP makes it less sensitive to fog, dust, snow and sunlight, making it a more accurate explosion-proof photoeye. |
|
|
 |
EMX NIR RETROREFLECTIVE PHOTOEYE KIT SLIDE SWING GATE OPENER SAFETY SENSOR5594 |
| Our NIR retroreflective photoeye sensor provides entrapment protection for commercial overhead doors, gates and parking barriers. With its flexible voltages, compact design and LED indicators, this photoeye is easy to use and install. The NIR kit includes: photoeye with hood, reflector, and mounting bracket with hardware. For gate or door operators that require a monitored safety device, see our UL325 photoeyes. The NIR is not UL compliant. FEATURES OF OUR NIR RETROREFLECTIVE PHOTOEYES Flexible voltage: 12 – 240 VDC, 24 – 240 VAC Watertight package for reliable outdoor installation Operating range: 30 feet Lead wire: 6 feet 2 LED indicators Sensitivity adjustment Compact size: 2.5? high, 1.5? deep, 0.75? wide |
|
|
 |
EMX NIR-50-325 UL325 RETROREFLECTIVE PHOTOEYE KIT GATE OPENER SAFETY SENSORS5595 |
| The NIR-50-325 is an extended range, retroreflective photoeye sensor providing entrapment protection for overhead doors, gates and barriers. The NIR-50-325 is UL325-2018 compliant and features an internal 10K resistor for monitored operation. Its flexible voltages, compact design and LED indicators make this photoeye easy to install. The NIR-50-325 kit includes: photoeye, reflector with hood, and mounting bracket with hardware. This retroreflective photoeye is not compatible with operators that use NO and COM (non-10K) monitoring methods. FEATURES OF OUR NIR-50-325 PHOTOEYES UL325-2018 complaint Flexible voltage: 12-30 VDC, 24-30 VAC Watertight package for reliable outdoor installation Operating range: 50 feet Lead wire: 6 feet 2 LED indicators Sensitivity adjustment Compact size: 2.5? high, 1.5? deep, 0.75? wide |
|
|
 |
EMX NIR-50 RETROREFLECTIVE PHOTOEYE KIT SAFETY SENOR WITH REFLECTOR GATE OPENERS5596 |
| The NIR-50 is an extended range, retroreflective photoeye that provides entrapment protection for overhead doors, gates and barriers. This retroreflective photoeye sensor offers flexible voltages, a compact design and LED indicators, making the NIR-50 an easy-to-install system. The NIR-50 kit includes: photoeye with hood, reflector, and mounting bracket with hardware. For gate or door operators that require a monitored safety device, see our UL325 PHOTOEYES. The NIR-50 is not UL compliant. FEATURES OF OUR NIR-50 RETROREFLECTIVE PHOTOEYES Flexible voltage: 12 – 240 VDC, 24 – 240 VAC Watertight package for reliable outdoor installation Operating range: 50 feet Lead wire: 6 feet 2 LED indicators Sensitivity adjustment Compact size: 2.5? high, 1.5? deep, 0.75? wide |
|
|
 |
EMX PC-3 INFRARED MODULATED PHOTOEYE THRU BEAM SAFETY SENSORS FOR GATE OPENERS5597 |
| The PC-3 infrared modulated photoeye sensor is an easy-to-install, cost-effective safety device for garage doors and rolling doors. When the infrared beam is interrupted, the relay common and normally open contacts in the receiver are closed. The LED indicator is lit when the PC-3 receiver is not aligned or when the beam is interrupted. FEATURES OF OUR PC-3 INFRARED MODULATED PHOTOEYE Works with any control board that accepts dry contact in the safety input Supervised relay output provides an “open” signal in case of power failure Non-reflective thru beam configuration is not affected by shiny surfaces Modulated infrared beam not affected by sunlight, rain, dust or dirt Wide detection angle: 24 degrees Indoor or protected outdoor operation of 30 feet |
|
|
 |
EMX PhotoeyeVault PROTECTION BOLLARD IRB-RET IRB-MON IRB-4X SAFETY SENSOR POST5598 |
| The PhotoeyeVault is a security-style bollard that protects photoeyes and provides a stylish alternative to visible hardware. Keep photoeyes safe from vandalism, inclement weather, and accidental contact damage with this solid steel fixture. The PhotoeyeVault hides electronics while blending in with the surroundings. Compatible with: EMX IRB-RET EMX IRB-MON EMX IRB-4X *photoeye sold separately Applications: Building entrances Pedestrian areas Any location needing a clean installation How it works: Two piece assembly – a front end with an attached base plate, a back end with an integrated vault cover Mounting patterns – internal markings to fit specific photoeyes noted above Slotted holes – on base plate for quick angle adjustment and installation PHOTOEYEVAULT FEATURES Quick and easy 8 screw assembly of two pieces 11 gauge (.120”) steel construction Accommodates wire run from the bottom or side |
|
|
 |
EMX IRB-4X2 INFRARED PHOTOEYE KIT WITH HOODS TRANSMITTER RECEVIER SAFETY SENSORS5599 |
| The EMX IRB-4X2 is used as a safety, reversing, or opening device in conjunction with automatic operators. The lens-less design of the IRB-4X photoeye makes it less sensitive to fog, dust, snow, and sunlight. For gate or door operators that require a monitored safety device, see our UL325 photoeyes. The IRB-4X is not UL compliant. FEATURES OF OUR EMX IRB-4X PHOTOEYES Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does not require additional signal amplifiers or relay boxes Weather-proof NEMA 4X enclosure Includes: Gray powder coated steel protective hood -set of 2 |
|
|
 |
EMX BPE-50 BATTERY POWERED PHOTOEYE THRU BEAM FOR GATES AND GARAGE DOORS5600 |
| Save power and make 90° adjustments with the compact BPE-50 battery-powered photoeye for gates and garage doors. The transmitter and receiver use 12-24 VDC/AC, but the BPE-50 can also be powered by two 3.6-volt lithium batteries. The included batteries have a life expectancy of two years. FEATURES OF THE BPE-50 BATTERY-POWERED PHOTOEYE Detection range: 50 feet Detection Angle: +/- 5% Power Supply: 12-24 VDC 24 VAC (2-3.6 Volt Lithium Batteries for transmitter optional; included) Expected Battery Life: 2 years Size: 4.4? (112mm) x 2.05? (52mm) x 1.3? (33mm) |
|
|
 |
EMX IRB-325 INFRARED PHOTOEYE KIT WITH HOODS SAFETY SENSORS FOR AUTOMATIC DOORS5601 |
| The IRB-325 is an external entrapment protection device, type B1, non-contact sensor for use with automatic gates and doors. This thru beam photoeye is powered by 12 VDC to 24 VAC and has an operating range up to 65 ft. This photoeye is certified UL325-2018 compliant with operators that require NC monitoring. The IRB-325’s powder coated steel hoods help protect against environmental exposure and accidental contact damage from vehicles and other equipment. A NEMA 4X enclosure provides the durability required for safety applications. |
|
|
 |
EMX IRB-MON2 UNIVERSAL THRU BEAM PHOTOEYE KIT TRANSMITTER RECEIVER W/ HOODS5602 |
| The IRB-MON2 is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use. This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment. FEATURES OF OUR IRB-MON PHOTOEYE PRODUCTS Type B1, non-contact sensor UL325-2018 compliant Lens-less design Simple 2-wire connection Relay contacts available NEMA 4X enclosure Selectable frequency modes Operating Range: up to 115 ft. (35m) Sensitivity adjustment: potentiometer |
|
|
 |
EMX OWL MICROWAVE MOTION & INFRARED TECHNOLOGY PRESENCE SENSOR DETECTION5606 |
| The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates. Featuring two configurable outputs, vehicle motion detection as well as presence detection, the OWL activation sensor will ensure the safety of people and goods. The remote control enables flexible set-up of the presence detection area, direction detection, hold time, and more. Advantages: Door activation and protection in one unit Disregard parallel traffic with filter settings Highly customizable presence detection area Save energy by reducing door openings Applications: High-speed and loading dock doors Activation for audible alarms and warning lights Manufacturing facilities Pull cord replacement Car dealerships OWL FEATURES Advanced microwave and infrared technology with adjustable detection field Distinguish between pedestrian and vehicle traffic for energy efficient door openings Adjustable filtering settings with remote control |
|
|
