GTO R4KPIVOT 10 Inch Pivot Bracket for 4000XL and 4000XLS Series Operators
The R4KPIVOT bracket is the 10 inch pivot bracket used in the mounting geometry of select GTO and Linear Pro 4000 series swing gate operators. In a linear actuator gate system, the pivot bracket helps place the arm at the correct angle and distance from the hinge line so the operator can pull or push the gate through the intended travel range. A wrong pivot bracket can cause a gate to open too far, stop short, bind near the closed position, or place excessive side load on the actuator. R4KPIVOT is commonly used as an individual service part when the original pivot bracket is bent, lost, or damaged, and it is also related to larger bracket kits such as HBP4XL or HB4000. Fitment should be confirmed by the old bracket length, hole pattern, operator model, and whether the installation is pull-to-open or push-to-open.
Compatible With
- Select GTO / Linear Pro SW4000XL and SW4000XLS swing gate operator bracket assemblies
- Select GTO / Linear Pro SW4200XL and SW4200XLS dual swing gate systems when each operator uses the same 10 inch pivot bracket
- Select 4000XL and 4000XLS bracket kits where R4KPIVOT is shown in the parts diagram
- Commonly related to HBP4XL heavy-duty bracket kit and HB4000 bracket set applications
- May not be correct for push-to-open installations that require a different long-pivot bracket
- Verify 10 inch pivot length, hole spacing, and operator manual dimensions before ordering
Features and Specifications
| Manufacturer | GTO / Linear Pro |
|---|
| Product Type | Pivot bracket |
|---|
| Part Number | R4KPIVOT |
|---|
| Application | Swing gate operator pivot geometry bracket |
|---|
| Compatible Operator Type | Select 4000 series actuator swing gate operators |
|---|
| Dimensions | Commonly described as 10 inch pivot bracket |
|---|
| Included Components | Pivot bracket only unless packaging states otherwise |
|---|
| Notes | Not the push-to-open bracket or full bracket kit |
|---|
Also Known As / Related Part Numbers
- R4KPIVOT
- R4K-PIVOT
- LIN-R4KPIVOT
- GTO R4KPIVOT
- Linear R4KPIVOT
- 10 inch pivot bracket
- 10 in pivot bracket
- 4000XL pivot bracket
- 4000XLS pivot bracket
- HBP4XL related kit
- HB4000 related bracket set
- R4388 push-to-open bracket reference only
Technician Note
Measure before replacing a pivot bracket. A bracket with a similar hole pattern but different length can change the actuator stroke and create limit or obstruction problems.
Before Ordering Checklist
- Confirm the original bracket is the 10 inch pivot bracket
- Verify the operator model and bracket diagram
- Check whether the installation is standard pull-to-open or push-to-open
- Compare hole spacing and bracket shape before ordering
- Inspect the other bracket pieces for bending or mismatch
Professional Advisory
Do not modify bracket holes or shorten the bracket to force fitment. Incorrect pivot geometry can damage the operator and create unsafe gate movement.
Important Ordering Warnings
- R4KPIVOT is not the same as the long push-to-open bracket used in some outward-opening applications.
- A pivot bracket alone will not fix a sagging gate or incorrect hinge geometry.
Product Questions and Answers
What is R4KPIVOT used for?
R4KPIVOT is the pivot bracket used in select GTO and Linear Pro 4000 series swing gate operator bracket assemblies.
Is this a 10 inch pivot bracket?
Yes. This part is commonly listed as the 10 inch pivot bracket for 4000XL and 4000XLS related applications.
Does R4KPIVOT fit push-to-open installations?
Do not assume it does. Push-to-open installations may require a different bracket such as a long-pivot push-to-open bracket, depending on the manual.
Can a wrong pivot bracket damage the operator?
Yes. Incorrect pivot geometry can cause binding, travel problems, heavy side loading, and premature actuator wear.
Is R4KPIVOT included in HBP4XL?
It is commonly related to HBP4XL or HB4000 bracket-set applications, but kit contents should be confirmed from the current supplier listing.
