Home > Vehicle Detectors > Exit Wands - Vehicle Sensor

Exit Wands - Vehicle Sensor

Driveway Vehicle Sensor (FM139, FM140, FM141 & R4500). When installed along the driveway on the inside of your property, the Driveway Vehicle Sensor will detect an approaching vehicle within a 12 foot (3.7m) radius and signal the GTO/ACCESS SYSTEMS, GTO/PRO gate opener to open. This provides “hands free” exiting of your property when guests or family members are visiting, The wired sensors are available in 50 ft. (15.3m), 100 ft. (30.5m), and 150 ft. (45.8m) direct burial wire lengths.

Sub-Categories

FM139

FM140

FM141

FM141-250

R4500 Wireless

DSP-9LP Probe Kit

DSP-50 Probe Kit

DSP-50LP 100ft Probe Kit

DSP-9LP 100ft Probe Kit

Products (Total Items: 22)

More results: [1] 2 Next Page View All

GTO / Mighty Mule PC Board w/tuning pot for Vehicle Sensor Exit Wand

$29.41

Linear Pro Access PC Board w/ Tuning Pot for Linear Pro Access FM139 / Mighty Mule FM138 Vehicle Exit Wand

$29.41

Linear Pro Access FM139 Exit Wand - Vehicle Sensor - FM139

Linear Pro Access FM139 Vehicle Sensor, Linear Pro Access FM139 Exit Wand. Linear Pro Access PRO FM139 Exit Wand Vehicle Sensor. The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The Linear Pro Access Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths.

$146.01

GTO FM139 Exit Wand - Vehicle Sensor - FM139

GTO FM139 Vehicle Sensor, GTO FM139 Exit Wand. GTO PRO FM139 Exit Wand Vehicle Sensor. The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The GTO Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths.

$146.01

Diablo Controls DML- 9LP Probe Kit Vehicle Loop Detector - 75'

This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The DML-9LP is a plug and play device and requires no settings. It also operates as a low current draw device and runs on 10 to 30 volts AC or DC.

$149.95

Diablo Controls DSP-50 Probe Kit Vehicle Loop Detector - 75'

This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity. This detector operates between 10 and 30 volts AC or DC.

$159.95

Diablo Controls DML- 9LP Probe Kit Vehicle Loop Detector

The Diablo DML-9LP vehicle sensor kit is designed for solar powered gate applications. This detector will operate on any voltage from 10 to 30 volts AC or DC and draws approximately 3 milliampere while waiting for a vehicle. The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The Diablo DML-9LP probe beats all competition for reliability, simplicity and “no car” current consumption. This series of Diablo loop detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”. These detectors are virtually crosstalk free in most applications. Working on battery-powered and other parking and access control loop applications, the Diablo DML-9LP is preset to the normal sensitivity level used in parking/access control applications and tunes itself to the best operating frequency. Environmental conditions are constantly compensated with the Diablo DML-9LP’s HYPERTRACK software. FEATURES Indicators - Separate Power and Detect LED’s. The GREEN Power LED will wink continuously once per second under normal operation. The RED Detect LED will turn on solid for a vehicle. Sensitivity - Automatic - compensates for extra long lead-ins. Probe Failure - The GREEN power indicator flashes twice per second if the probe circuit is open and 10 times per second if the probe circuit is shorted. This detector operates in the fall secure mode and will not output a “Detect” for either of these probe failure conditions. This “Fail secure” detector should be used on “free exit” loops. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Power - 10 to 30 Volts D.C. Approximately 3mA (no car on probe) and less than 25mA with car on the probe. Size - Height 1.52” Width 2.9” Depth 1.56” Connector - Removable 7-pin terminal block. Pin assignments are shown at right below.

$164.95

Diablo Controls DSP-50 Probe Kit Vehicle Loop Detector Road Traffic Control

The Diablo DSP-50 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. This device will work when connected to an embedded street loop or, (with a switch setting) the device will operate with a Mini-Loop available from Diablo Controls. The Diablo Controls Mini-Loop is a small ipipe shapedi device-approximately 5" by 3/4” and is designed to be buried in the ground to detect vehicles. The Diablo DSP-50 that comes with this kit when attached to the Probe MUST ONLY BE USED AS A FREE EXIT DEVICE as it gives a pulse output only. SENSITIVITY SWITCH This detector has a 10 position rotary sensitivity switch. The unit is shipped in the “5”position which is the normal sensitivity level. Sensitivity can be adjusted up and down from this level to accommodate different street loops or “MiniLoops”. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Power - 10 to 30 Volts D.C. ( 30 Ma. Max at 12 Volts) Enclosure - Impact resistant, high temperature plastic. H - 2.375i (60.4 mm) W n 0.86i (22 mm) D -2.25 i (58mm)

$169.95

Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4

SELF-CONTAINED SYSTEM WITH LOW STANDBY CURRENT - OPEN GATES AUTOMATICALLY AS GUESTS LEAVE A PROPERTY WITH THIS ALL-IN-ONE SYSTEM THAT WORKS WITH ELECTRIC OR SOLAR GATES. LOWEST STANDBY CURRENT IN THE INDUSTRY BY 95%. All-in-one unit without external circuit board. Hook wires directly to gate operator. • CP-4 may be installed above ground by screwing “puck” directly to an immovable object. • If installed above ground, use conduit to mechanically protect cable (animals will eat). • Car should be going at least 5 MPH at sensor to be detected. Install CP-4 at least: • 6-10 feet away from buried power, telephone, or invisible dog fence • 10 feet away from natural gas lines • 20 feet away from power pole with a transformer • 100 feet back from railroad traffic • 200 feet away from high power substation power lines • 80-100 feet back from gate operator

$169.95

Diablo Controls DML- 9LP Probe Kit Vehicle Loop Detector - 100ft

$169.95

Diablo Controls DSP-50 Probe Kit Vehicle Loop Detector - 100ft

$169.95

Cartell CP-4 Free Exit Wand Sensor System 100' foot for Gate Openers

$169.95

US Automatic 070305 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector

$174.95

Vehicle Sensor - Linear Pro Access FM140 Exit Wand - Automatic Vehicle Detector

Linear Pro Access FM140 Driveway Exit Wand - Linear Pro Access Car Exit Wand. Linear Pro Access PRO FM140 Exit Wand Vehicle Sensor. The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The Linear Pro Access Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths.

$179.87

Vehicle Sensor - GTO FM140 Exit Wand - Automatic Vehicle Detector

GTO FM140 Driveway Exit Wand - GTO Car Exit Wand. GTO PRO FM140 Exit Wand Vehicle Sensor. The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The GTO Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths.

$179.87

Cartell CP3-100-5W Vehicle Sensor Kit Exit 5 Wire

Car Vehicle detector Automatic Gate release Free Exit device

Availability: Not for Sale

$198.95

GTO R4500 Wireless Exit Wand - Vehicle Exit Sensor

GTO R4500, GTO Wireless Driveway Car Sensor - Free Exit Device. GTO PRO R4500 Wireless Exit Wand - Vehicle Exit Sensor. Automatically activates gate operator “Hands-Free” when a vehicle exits the property. Easy installation, no trenching required. The GTO Wireless Exit Sensor wand includes a wireless sensor wand with a plug-in electronic transmitter module.

$230.58

Linear Pro Access R4500 Wireless Exit Wand - Vehicle Exit Sensor

Linear Pro Access R4500, Linear Pro Access Wireless Driveway Car Sensor - Free Exit Device. Linear Pro Access PRO R4500 Wireless Exit Wand - Vehicle Exit Sensor. Automatically activates gate operator Hands-Free when a vehicle exits the property. Easy installation, no trenching required. The Linear Pro Access Wireless Exit Sensor wand includes a wireless sensor wand with a plug-in electronic transmitter module.

$230.58

GTO FM141 Exit Wand Vehicle Sensor

GTO FM141 Vehicle Sensing Device - GTO Exit Wand. GTO PRO FM141 Exit Wand Vehicle Sensor. The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The GTO Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths.

$236.58

Linear Pro Access FM141 Exit Wand Vehicle Sensor

Linear Pro Access FM141 Vehicle Sensing Device - Linear Pro Access Exit Wand. Linear Pro Access PRO FM141 Exit Wand Vehicle Sensor. The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The Linear Pro Access Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths.

$236.58

More results: [1] 2 Next Page View All