Genie 36681R1.S Circuit Board Assembly (1000) for Genie Models 3022 , 3024, 3042
This listing is another R3 board-family product for Genie 1000 series chain/belt openers. The control board is responsible for motor operation, travel limit learning, Safe-T-Beam input processing, wall-control communication, and wireless device memory. It is often replaced after confirmed board failure, surge damage, water damage, or programming failure that remains after accessory and sensor issues have been ruled out.
Because this row uses 36681R1.S in the name but 38875R3.S in the mfgid, it should be reviewed carefully against the original product setup. Several Genie R3 references can appear in the aftermarket, including 37470R3.S, 38001R3.S, 38334R3.S, 38874R3.S, and 38875R3.S. Those references should not be mixed with R1, R2, or R4 boards unless a manufacturer parts chart confirms the change.
Compatible With
Compatible with Genie R3 board family applications. Verify exact Genie model and original board reference.
- Genie ChainMax 1000 model 3022
- Genie IntelliG 1000 model 3024
- Genie 3024H where R3 board is specified
- Genie SilentMax 1000 model 3042
- Select Overhead Door Odyssey 1000 style applications using Genie R3 control-board references
- Applications referencing 36681R1.S, 37470R3.S, 38001R3.S, 38334R3.S, 38874R3.S, or 38875R3.S
- Not for Genie R1, R2, or R4 board families
Features and Specifications
| Manufacturer | Genie |
| Product Type | Circuit board kit/reference |
| Part Number | 38875R3.S |
| Name Reference | 36681R1.S circuit board assembly 1000 |
| Application | 1000 series chain/belt control board replacement |
| Compatible Models | 3022, 3024, 3024H, 3042 |
| Programming Required | Yes |
| Accessory Compatibility | Compatible remotes/keypads must be reprogrammed |
| Notes | Possible duplicate or alias of other R3 board listings |
Also Known As / Related Part Numbers
- 36681R1.S
- 36681R1S
- 38875R3.S
- 38874R3.S
- 37470R3.S
- 38001R3.S
- 38334R3.S
- 3022 board
- 3024 board
- 3042 board
- Genie R3 board
- Series II wall console kit
Technician Note
Do not choose this board only because the price or photo looks right. Genie boards with similar housing connections can be different by model group and wall-console generation.
Before Ordering Checklist
- Confirm model 3022, 3024, 3024H, or 3042.
- Review whether this row duplicates another R3 board product.
- Match the original board label and Genie parts diagram.
- Confirm whether the Series II wall console is included or needed.
- Reprogram travel and accessories after installation.
Professional Advisory
Control-board replacement should be followed by full safety testing. A bad door balance, damaged rail, or sensor wiring fault can remain even after the electronics are replaced.
Product Questions and Answers
Why does this listing mention 36681R1.S and 38875R3.S?
The uploaded name and mfgid use different references. Treat it as an R3 board-family listing and verify the exact original part number.
Which models are most commonly associated with this board?
Genie 3022, 3024, 3024H, and 3042 are common R3 board applications.
Is this interchangeable with the R4 board?
No. R3 and R4 boards are for different model families.
Can old wireless devices be reused?
Compatible remotes and keypads can usually be reused after they are programmed to the new board.
Should this be reviewed for duplicates?
Yes. This row shares R3 references with other products and should be checked for duplicate catalog setup.
