The Model AKR-1 Exterior Digital Keypad with Radio Receiver is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.
Up to four sets of block coded MegaCode® transmitters (up to 480 transmitters total) can be used to gain access through the AKR-1 s built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. A Radio Test Mode is provided for testing transmitters and detecting radio interference. Programming of individual (non-block coded) transmitters is not supported by the AKR-1.
Linear s Model MGT safety edge transmitter is compatible with the AKR-1. This supervised transmitter is used to detect and transmit obstacle events to the AKR-1 receiver. Obstacle signals from an MGT transmitter will activate Relay #2.
Features
- Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities
- Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
- Built-in radio receiver
- Four independent outputs and timers: two form C relays and two solid-state open collector outputs
- Accepts 480 entry codes, 480 block code transmitters, plus one fully supervised Model MGT safety edge transmitter
- Two LED indicators show system status
- Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout
- Down light illuminates whenever keypad is used
- Tactile and audible feedback
- Keylock secures keypad to mounting backplate
- RF frequency: 318 MHz
- 4? W x 7? H x 3? D
Order number: ACP00747
| AKR-1 |
|---|
| Dimensions: | 4.0? W x 7.0? H x 3.0? D (101.6 x 177.8 x 76.2 mm) |
ELECTRICAL |
| Voltage: | 12-24 Volts AC or DC (AC supply must be transformer isolated) |
| Current: | 10 mA typical, 150 mA maximum |
OUTPUTS |
| Main Relay: | Form C 5 Amps @ 28 Volts maximum |
| Auxiliary Relay: | Form C 1 Amp @ 28 Volts maximum |
| Solid State Outputs: | Short-to-common 100 mA @ 24 VDC maximum |
INPUTS |
| RF: | Integral 318 MHz super regenerative receiver @ -95 dBm sensitivity (nominal); receives Linear block code transmitters |
| Open Request: | Terminal input activates the programmed control relay |
| Door Sense/Inhibit: | Monitors status of a protected door or can be programmed to restrict access to relay 1 |
| Keypad: | Monitors status of a protected door or can be programmed to restrict access to relay 1 |
ENVIRONMENTAL |
| Temperature: | -22° F to +149° F (-30° C to +65° C) |
| Humidity: | 5% to 95% non-condensing |
| Accessories for use with the AKR-1 |
|---|
| Model | Description |
| ACT-21B | 1-Channel Block Coded Key Ring Transmitter |
| ACT-22B | 3-Channel Block Coded Key Ring Transmitter |
| ACT-31B | 1-Channel Block Coded Key Ring Transmitter |
| ACT-34B | 4-Channel Block Coded Key Ring Transmitter |
| GNB-1 | Burial Mount Gooseneck |
| GNC-1 | Curb Mount Gooseneck |
| MDT-1B | 1-Channel Block Coded Visor Transmitter |
| MDT-2B | 3-Channel Block Coded Visor Transmitter |
| MDT-4B | 5-Channel Block Coded Visor Transmitter |
| MGT | Gate Safety Edge Transmitter |
| MT-1B | 1-Channel Block Coded Visor Transmitter |
| MT-2B | 2-Channel Block Coded Visor Transmitter |
