Linear AM-CRI, ACP00717 Card Reader Interface, 26bits Wiegand Interface
The AM-CRI is a card reader that will support one or two 26-bit, 30-bit, or 31-bit Wiegand input devices. If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI. Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven-wire (two LEDs in reader) cable.
- For equipping a Linear access control system with one or two Wiegand devices
- Card Reader Interface can be used with up to two 26, 30, or 31-Bit Wiegand input devices
- Power is supplied by system controller or external source for locally powered readers
- 4.45" W x 5.75" H x 1.5" D
Part Number: ACP00717
| Capacity | Up to two 26 or 31-bit Wiegand devices; two internal rotary switches select device address |
| Wiring | Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable |
| Recommended Wiring Type | up to 300 feet with 24 AWG, 500 feet with 20 AWG |
| Power | Supplied by an AM3Plus, AE1000Plus, or AE2000Plus access controllers or external source for locally powered readers |
| Dimensions | 4.45" W x 5.75" H x 1.5" D |
