The Model AM-RRR Remote Radio Receiver is designed for use with Linear s access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.
Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver s connector. The directional (EXA-2000) and omnidirectional (EXA-1000) remote antennas wire to the receiver s antenna connector with type RG-59 cable.
An onboard RADIO RANGE knob allows adjustment of the receiver s gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receiver s performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals.
The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.
Features
- Provides extended range for radio-based access control system
- Up to 500 foot radius radio coverage
- Weather-resistant housing for outside or indoor mounting
- Optional directional remote or omnidirectional remote antennas
- Integral radio gain control for adjustment of radio range
- Power supplied by access controller
- Compatible with all MegaCode transmitters
- Compatible with AM3Plus, AE1000Plus, and AE2000Plus ONLY
- RF frequency: 318 MHz
- 4.25 W x 6.25 H x 2.5 D without antenna
| AM-RRR |
|---|
| Indicator: | Red/green LED turns red for DC power from controller, turns green when access is granted to a transmitter; radio LED lights when the receiver detects a radio signal |
| Gain Adjustment: | Radio range knob for setting maximum radio range |
| Antennas: | 9-1/2? whip antenna with F-connector (supplied); optional remote directional EXA-2000 or remote omnidirectional EXA-1000 antenna, wiring with type RG-59 cable to receiver s connector |
| Wiring: | up to 300 feet with 24 AWG, 500 feet with 20 AWG |
| Frequency: | 318 MHz |
| Power: | Supplied by access controller |
| Dimensions: | 4.25 W x 6.25 H x 2.5 D (without antenna) |
| Accessories for use with the AM-RRR |
|---|
| Model | Description |
| MDKP | Exterior Wireless Keypad |
| EXA-1000 | Omni-directional Remote Antenna |
| EXA-2000 | Directional Remote Antenna |
| Models compatible with the AM-RRR |
|---|
| Model | Description |
| AE1000Plus | Commercial Telephone Entry System with Access Control Four Doors |
| AE2000Plus | Commercial Telephone Entry System with Access Control Four Doors, Large Screen |
| AM3Plus | 4-Portal Access Controller |
| MDT-1B | 1-Channel Block Coded Visor Transmitter |
| MDT-2B | 3-Channel Block Coded Visor Transmitter |
| MDT-4B | 5-Channel Block Coded Visor Transmitter |
| MT-1B | 1-Channel Block Coded Visor Transmitter |
| MT-2B | 2-Channel Block Coded Visor Transmitter |
| ACT-31C | 1-Channel Custom Block Coded Key Ring Transmitter |
| ACT-34C | 4-Channel Custom Block Coded Key Ring Transmitter |
| ACT-31D | 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag |
| ACT-34D | 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag |
| MGT | Gate Safety Edge Transmitter |
