Linear MiniProx-BK Wiegand 125 kHz HID Proximity Reader Black
The MiniProx-BK is the black version of the compact MiniProx Wiegand proximity reader. It is used where an access-control system needs to read HID-compatible 125 kHz cards or fobs from a narrow mounting surface. The reader does not decide who gets access by itself; it sends the card data to the controller, and the controller makes the access decision.
This style of reader is commonly chosen for gate pedestals, door frames, exterior entry posts, and controlled pedestrian gates. It is a good fit when the job calls for a compact HID-compatible reader with Wiegand output, but the system still needs the proper controller, power, wiring, and credential programming to work correctly.
Compatible With
Used with compatible Wiegand access control systems and commonly associated with Linear eMerge and Max 3 applications that support HID 125 kHz proximity credentials.
- Linear eMerge access control systems when configured for HID 125 kHz Wiegand readers
- Linear Max 3 access control systems when configured for compatible Wiegand proximity readers
- Compatible Wiegand controller inputs on gate and door access systems
- HID-compatible 125 kHz proximity cards and fobs when the controller accepts the credential format
- Pedestrian gates, doors, entry posts, and access-control pedestals with proper wiring and power
- Not a stand-alone reader/controller and not a keypad
Features & Specifications
| Manufacturer | Linear / IEI |
|---|
| Product Type | Wiegand proximity card reader |
|---|
| Part Number | MiniProx-BK |
|---|
| Common Order Number | 0-298066 |
|---|
| Frequency | 125 kHz |
|---|
| Credential Type | HID-compatible proximity card or fob, depending on controller format |
|---|
| Interface | Wiegand |
|---|
| Mount Style | Mullion / narrow surface mount |
|---|
| Read Range | Up to about 5.5 inches in common listings, site conditions vary |
|---|
| Color | Black |
|---|
Also Known As / Related Part Numbers
- MiniProx-BK
- MiniProx BK
- 0-298066
- HID MiniProx
- HID 5365 family reference
- Linear eMerge reader
- Linear Max 3 reader
- MiniProx-GY related gray version
- 0-298000 related gray catalog reference
Technician Note
For proximity readers, the reader, controller, and credential format all have to line up. A 125 kHz reader can still fail to work if the card format is not accepted by the controller.
Before Ordering Checklist
- Confirm whether the job requires gray or black housing.
- Verify the Linear order number against your existing reader or parts list.
- Confirm the controller accepts Wiegand input.
- Confirm the access cards or fobs are HID-compatible 125 kHz credentials supported by the system.
- Check mounting space, cable route, and reader voltage before ordering.
Important Ordering Warnings
Do not select this reader by appearance only. Confirm black finish, Wiegand output, 125 kHz credential type, and controller compatibility.
Professional Advisory
Reader wiring and access-control programming should be handled by a qualified access-control technician if the system controls a secured door, gate, maglock, strike, or monitored entry point.
Product Q&A
Is this reader a stand-alone keypad or controller?
No. It is a proximity reader that sends Wiegand data to a compatible access controller.
What credentials does it read?
It is used with compatible HID 125 kHz proximity cards or fobs when the controller accepts the credential format.
Can it be used outdoors?
MiniProx-style readers are commonly used in indoor and outdoor access-control applications when installed according to the reader specifications and wiring practices.
Will it work with Linear eMerge or Max 3?
It is commonly associated with Linear eMerge and Max 3 systems when those systems are configured for compatible Wiegand HID proximity readers.
Why should I verify the part number and color?
Some Linear references list different order numbers for black and gray MiniProx readers, so color and number should be confirmed before ordering.
