Linear Pro Access PRO-SW3000XLS Single Swing Gate Opener
The PRO-SW3000XLS is the primary single-gate version of the Linear Pro Access / GTO PRO 3000XLS swing gate operator family. It is a low-voltage linear actuator system built for customers who need a complete swing gate automation package for one residential vehicular gate leaf. The operator is commonly chosen for lighter swing gate applications where the gate is within the 16 ft / 650 lb range, the hinges are in good condition, and the opening geometry can support the required bracket placement. Compared with older XL generation equipment, the XLS generation uses updated rev-counter and mounting/scraper-seal design details, so replacement parts should be matched by the exact operator generation. Correct fitment is not only the arm model; it also depends on whether the system is single or dual, pull-to-open or push-to-open, whether solar charging is used, and whether the control board and accessory wiring match the current installation.
Accessories Included
- Battery Backup
- 318 MHz Radio Receiver
- Entry Transmitter
- AC Transformer
- Mounting hardware
Compatible With
- Linear Pro Access PRO-SW3000XLS single swing gate opener systems
- GTO PRO SW-3000XLS and PRO3000XLS single swing gate applications
- Single vehicular swing gates up to 16 ft long and 650 lb when properly installed
- Residential, farm, ranch, and light-duty driveway swing gate applications
- Chain link, tube, panel, ornamental, wood, aluminum, steel, and vinyl gates when hinges and structure are suitable
- Systems using compatible 318 MHz transmitters, keypads, receivers, push buttons, exit wands, and dry-contact accessories
- Dual-gate installations when paired with the correct PRO-SW3200XLS secondary operator and matching XLS controller setup
Features and Specifications
| Manufacturer | Linear / GTO |
|---|
| Product Type | Single swing gate operator |
|---|
| Part Number | PRO-SW3000XLS |
|---|
| Application | Primary operator for one swing gate leaf |
|---|
| Compatible Operator Type | Linear actuator swing gate system |
|---|
| Power Platform | 12 VDC battery-backed system |
|---|
| Gate Rating | Up to 16 ft and 650 lb when installed correctly |
|---|
| Security Technology | Commonly used with 318 MHz GTO / Linear Pro access controls |
|---|
| Included Components | Kit contents vary by supplier, commonly includes actuator, control box, receiver, transmitter, transformer, battery, and mounting hardware |
|---|
| Notes | XLS generation parts are not automatically interchangeable with older XL generation systems |
|---|
Also Known As / Related Part Numbers
- PRO-SW3000XLS
- PROSW3000XLS
- PRO SW-3000XLS
- SW3000XLS
- GTO PRO 3000XLS
- GTO/Linear PRO-SW3000XLS
- LPA-PRO-SW3000XLS
- Possible catalog reference: 986100
- Related secondary operator: PRO-SW3200XLS / PRO3200ARMXLS
Technician Note
The most common ordering mistake is mixing older XL parts with the newer XLS family. Match the actuator label, control box, rev counter board, and front mount style before replacing only one part of the system.
Before Ordering
- Confirm this is a single-gate installation or that the correct secondary operator is being used for a dual gate.
- Confirm gate length, approximate weight, hinge condition, and post strength.
- Check whether the gate is pull-to-open or requires push-to-open brackets.
- Verify XLS generation parts if replacing an older arm or control box.
- Confirm accessory and safety-device requirements for the finished gate system.
Professional Advisory
Low-voltage gate operator wiring is still part of a moving gate system. A qualified gate technician should be used when gate movement is unsafe, brackets are damaged, travel limits cannot be set correctly, or entrapment protection is missing.
Product Questions and Answers
Is the PRO-SW3000XLS a primary or secondary operator?
This row is for the primary single-gate operator package. Dual gate systems require the correct matching secondary operator and dual-gate wiring setup.
What size gate is the PRO-SW3000XLS used on?
It is commonly rated for a single swing gate up to 16 ft long and 650 lb when the gate is properly hinged and within installation requirements.
Can I use this with an older SW3000XL system?
Do not assume interchangeability. XLS generation arms and electronics should be checked against the exact control board, actuator label, and parts diagram.
Can this operator be solar powered?
Yes, the PRO-SW3000XLS is commonly used in transformer-charged or compatible solar-charged low-voltage installations, depending on site conditions and cycle use.
What type of gate hardware matters most before ordering?
Good hinges, a solid post, correct bracket geometry, and a gate leaf that swings freely are critical. Operator force should not be used to overcome a dragging gate.
