|
|
|
|
 |
Mega Code / Linear Delta-3 (DRA/DNR00001) 24v Radio Receiver for Linear Opener1257 |
| The Linear Delta-3 model DR also known as the DR3A is a standard one channel, 24-volt, three terminal, wire lead antenna gate or garage door opener radio receiver part number DNR00001. This radio receiver works with all the Linear Delta-3 or Moore-O-Matic 8 DIP (on/off) code switch remotes on the 310MHz frequency. With the industry standard 3 terminal screw connector, it can connect directly to most older garage door openers or gate openers that use the standard 12 volt, 3 terminal connection using the adapter tabs included, or it can be powered by the optional Linear TF524 plug-in ac power adapter (sold separately). Controls one gate or garage door opener |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Linear DNR00102 / GRD2 12/24V AC/DC 310MHz Delta 3 2-Channel Gate Radio Receiver4554 |
| The GRD-2 is a 2-channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the Delta-3 radio format, with 256 possible codes for each channel, set by dipswitch. |
|
|
|
|
|
|
 |
Linear DNR00100 / MDR-U 110V AC 318MHz MegaCode NO 1-Channel Plug-in Receiver4569 |
| The Model MDR/U 1-Channel Plug-in Receiver is a versatile (universal) receiver that makes it very easy to equip nearly any garage door operator for use with Linear’s popular MegaCode format transmitters. MegaCode uses a frequency of 318 MHz and features over one million radio codes to all but eliminates any possibility of code duplication. It offers simplified programming via the receiver’s learn mode. |
|
|
|
|
 |
Linear DNR00105 / MGR-2 318MHz 12/24V MegaCode 2-Channel Wireless Gate Receiver4571 |
| The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver. |
| Availability: Not for Sale |
|
|
|
|
|
|
 |
Linear MCS106603 Omni-directional Remote Whip Antenna, F Connector & 15ft Cable4582 |
| The Model 106603 Remote Whip Antenna is designed as a remotely mounted antenna. This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable. |
|
|
|
|
 |
Linear MCS109201 Wiring Harness Power Adapter Transformer 3 to 2 Terminal Block4585 |
| The Model 109201 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts 3-terminal receivers to 2-terminal operators. The harness includes a pre-wired 3-position terminal block, 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals. |
|
|
 |
Linear MCS109207 Wiring Harness Power Adaptor Transformer 3 to 2 Terminal Block4587 |
| The Model 109207 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts Multi-Code 109020 and 309013 3-terminal receivers with push-on terminals to 2-terminal operators. The harness is prewired with three push-on terminals, a 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals. |
|
|
 |
Linear MCS109920 300MHz 10 Dip Switch 1-Channel 110V AC Gate Radio Receiver4591 |
| The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Linear 190-109736 831R-288RF: 1-DOOR, OPEN-CLOSE-STOP, RECEIVER, 288 MHZ5581 |
| Linear 190-109736 831R-288RF: 1-DOOR, OPEN-CLOSE-STOP, RECEIVER, 288 MHZ 24-volt, one-door, open-close-stop, commercial door operator receiver in textured aluminum case, external antenna connector, whip antenna included, 288 MHz. Features Three channels – three relay outputs Textured aluminum case Terminal strip for wiring Wire whip antenna with “F” connector Compatible with Allstar Classic, Allister, and Pulsar dipswitch transmitters, and MVP quik-code transmitters Power: 24 VAC/VDC Codes: 19683 Learning technology RF frequency: 288 MHz Dimensions: 8.75? W x 5.375? H x 1.75? D Order number: 190-109736 |
|
|
 |
Linear EXA-1000 AAE00198 Omni Directional Extending Range Antenna Kit 5718 |
| The EXA-1000 is a 1/2 wave, center fed, vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot, 75-ohm coaxial cable. The cable connects to the antenna base on one end and the receivers F connector on the other. If the antenna must be mounted further than five feet from the receiver, an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied. Because of the cable resistance, the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable. Features Compatible with all Linear receivers with Type F antenna connector Receives signals in 288 to 320 MHz range Omni-directional remote antenna Includes 5 feet of coax U-bolt for post mounting Dimensions: 3? W x 19.5? H x 6? D |
|
|
