My Account  |  0 item(s)    View Cart
Home > Linear Xtended Range Remote Kits > Linear Xtender Range Transmitter
Linear SNT00397 XT-4H Two Button 4-Channel Handheld Mid-range Transmitter 2Watt
Linear SNT00397 XT-4H Two Button 4-Channel Handheld Mid-range Transmitter 2Watt
Email a friend Email a friend
Add to Wish List Add to Wish List
Share |

Linear SNT00397 XT-4H Two Button 4-Channel Handheld Mid-range Transmitter 2Watt

Item Id: LIN-XT-4H-SNT00397
Review this item Review this item
Your Price: $245.00
Availability:
Not for Sale
Description
Linear SNT00397 XT-4H Two Button 4-Channel Handheld Mid-range Transmitter 2Watt
  • Up to two miles of line-of-sight range
  • RF transmit LED
  • Pushbutton activation
  • Includes belt clip
  • Antenna included
  • Power: Two 9-volt batteries
  • Codes: Over 64,000
  • RF frequency: 27.255 MHz
  • Dimensions: 2.375" W x 12.25" H x 1.375" D

The Model XT-4H 4-Channel Handheld Mid-range Transmitter is designed for use in various wireless remote control applications. When activated, the XT-4H portable transmitters will send a 2 watt, 27.255 MHz, digital encoded, FSK modulated, signal to their companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device. 

The Model XT-4H is a four-button, four channel transmitter. Each transmission is limited to a maximum of 30 seconds duration. 

The XT-4H portable transmitter is powered by two 9-volt alkaline batteries in series, supplying 18 volts. During transmissions, the red operation indicator will light (visible through a window next to the antenna). If the transmitter s battery voltage is low, the indicator will blink during transmissions. The XT-4H transmitter has battery supervision capabilities. If the combined battery voltage drops below 12 volts, a low battery message will be included with any signal transmitted, causing the receiver s low battery output to activate. The test button next to the indicator sends a test transmission when pressed. 

Two 8-position switches set the unit s system code. This code must be matched in the transmitter s companion receiver. There are 65,536 different system codes possible. The option switch selects the receiver s bank (for the XR-16 receiver only). 

Each transmitter is provided with a 6-inch rubber duck antenna and a removable belt clip. 

Part Number: SNT00397


Browse Similar Items