My Account  |  0 item(s)    View Cart
Home > Safety Sensors
Linear SST00100, DXS-32 Supervised Miniature Door/Window Transmitter, Ivory
Linear DXS-32 Supervised Miniature Door/Window Transmitter, Ivory
Email a friend Email a friend
Add to Wish List Add to Wish List
Share |

Linear SST00100, DXS-32 Supervised Miniature Door/Window Transmitter, Ivory

Item Id: LIN-DXS-32
Review this item Review this item
Your Price: $34.50
Quantity
Description
Linear DXS-32 Supervised Miniature Door/Window Transmitter, Ivory

The Model DXS-32 Supervised Miniature Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear s DXS and DX format receivers. This transmitter can be used in a variety of wireless remote control applications. Triggering the transmitter with its built-in magnetic switch sends a digitally coded wireless signal to its companion receiver.

The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to unique codes, so no field coding is required. The DXS-32 can send four different codes: alarm, restore, low battery and status.

In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the frame. When the magnet moves more than 1/2? away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a restore signal is sent. The magnet is adjustable with four height positions. A 1/4? high magnet spacer is also supplied to snap on to the base of the magnet.

The transmitter is powered from two 3-Volt #2032 lithium batteries with an expected battery life of up to 4 years. Every hour, the DXS-32 will send a status transmission to the receiver. The hourly signal updates the receiver to the transmitter s condition. By monitoring status transmissions, the receiver can determine if a transmitter has a low battery or has been removed from the system. DXS format receivers can monitor status signals, DX format receivers cannot.

Normally, the transmitter sends an exit/entry delay transmission code. Cutting an internal jumper selects an instant transmission code. Cutting this jumper doesn t change the time of the actual transmissions, but changes the code of the signal sent so the receiver can determine the transmitter s function.

Features

  • Ultra-compact design
  • Alarm, alarm restore, supervisory and low battery transmissions
  • Includes magnet for internal contact
  • DXS format
  • Powered by 2032 two lithium batteries (included)
  • RF frequency: 315 MHz
  • 0.9? W x 2.25? H x 0.6? D
  • Order number: SST00100

Browse Similar Items