MMTC 1KXL-CC NEMA 4 Exterior On-Off Key Switch with Changeable Core - Surface Mount
The MMTC 1KXL-CC NEMA 4 Exterior On-Off Key Switch with Changeable Core - Surface Mount is a technician-grade MMTC keyed control station used where access to an operator or control circuit must be limited to authorized keyholders. It is most often selected for gate operators, commercial overhead doors, rolling doors, industrial door operators, and equipment control points that accept external key-switch command wiring. The important detail with this part is not just the enclosure size - it is the combination of switch action, cylinder style, stop-button function, and mounting format. A similar-looking MMTC station can have a different contact action or a different keying format, which can cause ordering problems if the part number is matched only by appearance. This model should be matched to the wiring diagram and the facility keying requirement before installation.
For service replacement, this product is best identified by the MMTC part number, the required operator command function, and the cylinder/core type. In the field, these key switches are usually tied into low-voltage control terminals, but the installer should still follow the operator manual and applicable electrical requirements. If the existing station is damaged, weathered, sticking, missing keys, or no longer matching the property key system, replacing it with the correct MMTC configuration helps restore secure keyed control without changing the operator itself.
Compatible With
- Select operator, access-control, and industrial control circuits that require maintained ON/OFF keyed control and a changeable-core cylinder format. Related to the MMTC 1KXL family but different from BC, standard mortise, and hold open-close versions.
- Related MMTC key-switch families may share similar control-station use, but the exact switch action, stop-button requirement, cylinder style, enclosure type, and mounting format must match the job.
- Common applications include gated properties, commercial overhead doors, rolling steel doors, industrial doors, loading areas, secured service entrances, equipment rooms, and access-control interfaces that are wired for external keyed control.
Features and Specifications
| Manufacturer | MMTC |
| Product Type | Maintained key switch |
| Part Number | 1KXL-CC |
| Product Family | 1KXL |
| Application | Maintained on-off keyed control |
| Mounting Style | Exterior surface mount |
| Enclosure / Rating | NEMA 3R, 4, and 12 style exterior surface-mount enclosure |
| Cylinder / Core Type | Changeable core cylinder |
| Stop Button | No stop button |
| Dimensions | 4-3/8 in H x 4-1/8 in W x 2-5/8 in D |
| Electrical Rating | 15 amp at 125/250 VAC switch rating where applicable |
| Notes | Match switch action, cylinder style, and control-circuit wiring before ordering. |
Also Known As / Related Part Numbers
Technician Note
This is the changeable-core version of a maintained ON-OFF switch. It should not be substituted for a center-return OPEN-CLOSE key switch. When replacing a key switch, take a photo of the existing wiring and terminal markings before removal. Similar MMTC stations can use different contact actions even when the enclosure looks nearly identical.
Before Ordering Checklist
- Confirm the existing MMTC part number or the required control-station function.
- Match the switch action: open-close center return, open-close with stop, on-off maintained, or hold open-close.
- Verify the cylinder/core type: standard mortise, Best/equivalent, changeable core, or S-Type Large Format.
- Check the enclosure and mounting style against the original station or project plan.
- Review the operator wiring diagram before connecting any open, close, stop, or common terminals.
Professional Advisory
Key switches are control devices, not safety devices. Do not use this product to bypass monitored photo eyes, sensing edges, entrapment protection, or any required UL 325 safety equipment. If the operator wiring is damaged, high-voltage wiring is exposed, or the gate/door moves unpredictably, have the installation checked by a qualified gate or garage door technician.
Product Questions and Answers
What is the MMTC 1KXL-CC used for?
The MMTC 1KXL-CC is used for maintained ON/OFF keyed control on compatible operator, access-control, or industrial circuits that require a key-held selected state.
Is 1KXL-CC an open-close key switch?
No. 1KXL-CC is an ON/OFF maintained key switch. It should not be used as a momentary open-close station unless the wiring diagram specifically supports that function.
Can 1KXL-CC be used outdoors?
Yes, it is part of the exterior surface-mount 1KXL family, but installation should still follow the enclosure rating, wiring method, and local electrical requirements.
Are the 1KXL cylinder versions interchangeable?
The switch function may be related, but the cylinder system differs. Confirm whether the job requires standard mortise, Best/equivalent, changeable-core, or another keying format.
What should be checked before replacing 1KXL-CC?
Check the existing part number, maintained contact function, cylinder type, enclosure dimensions, and the control circuit voltage/current requirements.
