MMTC - CP-2X Nema 7 & 9 Explosion Proof Ceiling Pull Switch DPST Metal Enclosure

MMTC CP-2X Explosion Proof Ceiling Pull Switch DPST Metal Enclosure

Write a Review

PRICE $216.66

The MMTC CP-2X is an explosion-proof ceiling pull switch used for commercial door, industrial door, and access-control command applications where a pull-cord style control is preferred over a wall button. It is commonly selected for areas that need a rugged NEMA 7 and NEMA 9 style metal enclosure and a double-pole single-throw pull switch arrangement. This type of control is often used in warehouses, service bays, industrial rooms, and secured openings where the operator accepts a momentary or maintained dry-contact command through the proper control circuit. Fitment depends on the door or gate operator wiring requirements, the hazardous-location requirements of the job, and the contact style needed by the control board. Always match the CP-2X to the original station function, control voltage, enclosure requirement, and local electrical code before ordering or installing.

Part Number: MMTC-CP-2X

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description

MMTC CP-2X Explosion Proof Ceiling Pull Switch Product Details

The MMTC CP-2X is a heavy-duty ceiling pull switch built for industrial control locations where a cord-operated command is easier to reach than a wall-mounted push button. Instead of mounting at hand height, the pull switch is installed overhead and activated by a pull cord, making it useful near loading doors, service entrances, commercial bays, and controlled equipment areas. The metal enclosure is commonly referenced as NEMA 7 and NEMA 9 explosion-proof style, and the switch is associated with double-pole single-throw ceiling pull applications. Correct selection matters because ceiling pull controls can look similar while using different enclosure ratings, contact arrangements, head styles, and wiring layouts. This unit should be matched to the operator input circuit and the jobsite hazard classification by a qualified installer.

Compatible With

May be used with commercial overhead door operators, rolling steel door operators, industrial door controls, dock door controls, select gate operators, barrier arm operators, and access control systems that accept low-voltage dry-contact push-button commands when the control circuit is designed for a compatible ceiling-pull dry-contact input. Commonly associated with industrial overhead doors, rolling doors, warehouse doors, service-bay doors, dock doors, and select gate or barrier controls that use external command stations. Verify the required contact style, enclosure rating, hazardous-location requirements, and wiring diagram before substituting it for CP-1X, CP-1, CP-2, CP-2B, CP-2SW, or other ceiling pull switch models.

Features & Specifications

Manufacturer	MMTC
Product Type	Explosion-proof ceiling pull switch
Part Number	CP-2X
Application	Overhead pull-cord control for door, gate, and industrial operator command circuits
Mount Style	Ceiling mount
Enclosure	Metal enclosure, commonly referenced as NEMA 7 and NEMA 9 explosion-proof style
Contact Type	DPST / double-pole single-throw style; verify wiring diagram for the application
Dimensions	Approximately 6-1/8 in H x 3 in W x 5 in D
Compatible Operator Type	Operators with compatible low-voltage external command inputs
Notes	Hazardous-location work and line-voltage wiring should be handled by a qualified technician

Also Known As / Related Part Numbers

CP-2X
MMTC CP-2X
MMTC-CP-2X
CP2X
CP 2X
Explosion proof ceiling pull switch
NEMA 7 and 9 ceiling pull switch
Related ceiling pull models: CP-1X, CP-1, CP-2, CP-2B, CP-2SW

Technician Note

Match the contact arrangement and enclosure requirement before replacing an older ceiling pull. A NEMA 4 ceiling pull and a NEMA 7/9 explosion-proof ceiling pull are not selected for the same environment just because both use a pull cord.

Before Ordering Checklist

Confirm the existing part number or station function is CP-2X.
Verify the operator input accepts the required dry-contact command.
Check whether the job requires NEMA 7/9 explosion-proof style equipment.
Confirm mounting space, conduit entry, and pull-cord location.
Have hazardous-location wiring reviewed by a qualified technician.

Professional Advisory

Do not install or replace explosion-proof controls as a shortcut repair. Hazardous-location equipment must be selected and wired according to the site classification, operator wiring diagram, and applicable code requirements.

Product Q&A

What is the MMTC CP-2X used for?

The CP-2X is used as a ceiling-mounted pull switch for door, gate, or industrial operator command circuits where a pull-cord control is needed.

Is the CP-2X the same as a standard ceiling pull switch?

No. The CP-2X is commonly referenced as an explosion-proof NEMA 7 and NEMA 9 style pull switch, while standard ceiling pulls may use different enclosures and are not interchangeable for hazardous locations.

Can this be used on any gate or door operator?

Only if the operator has a compatible control input and the wiring matches the contact arrangement required by the CP-2X application.

Does the CP-2X replace CP-2 or CP-2B?

Not automatically. CP-2, CP-2B, and CP-2X are related ceiling pull styles, but enclosure rating, head design, and contact requirements must be verified.

Who should install an explosion-proof ceiling pull switch?

A qualified door, gate, or electrical technician should install it, especially where hazardous-location or line-voltage wiring is involved.