The MMTC PBC-2 is a NEMA 1 rated interior flush-mount two-button momentary control station providing independent OPEN and CLOSE commands for gate and door operator systems. Mounting into a standard single-gang back box (4"H x 2"W), the PBC-2 presents a stainless steel faceplate (4.25"H x 2.75"W) with two clearly labeled momentary push buttons. Rated at 10A @ 250VAC and compatible with 110-240VAC control circuits, the station is suitable for most residential and commercial gate operators. The PBC-2 adds OPEN-CLOSE bidirectional command capability compared to the single-button PBC-1, and is the two-button variant of the PBC flush-mount control station series.
A: The PBC-2 has two buttons - OPEN and CLOSE - allowing the user to independently command gate opening and closing. The PBC-1 has a single button typically used for a single-action or toggle function.
A: No. The MMTC PBC-2 is rated NEMA 1, which is intended for indoor use only. It is not weatherproof and should not be exposed to rain, moisture, or outdoor conditions.
A: The PBC-2 installs into a standard single-gang electrical box. The back box measures 4" H 2" W, and the stainless steel faceplate measures 4.25" H 2.75" W for a clean flush-mount finish.
A: The PBC-2 features momentary contact action, meaning each button only activates its circuit while physically pressed and held. The signal stops the moment the button is released.
A: The PBC-2 is rated at 10A @ 250VAC and is compatible with systems operating in the 110-240VAC range, making it suitable for most standard North American gate operator control circuits.
[ITEMPRICE]
