The MMTC PBC-3 is a NEMA 1 rated interior flush-mount three-button momentary control station providing OPEN, CLOSE, and STOP commands for gate and door operator systems. Following the PBC series design - stainless steel faceplate, standard single-gang back box, momentary normally open contacts - the PBC-3 adds a dedicated STOP function that allows gate travel to be immediately halted mid-cycle. Interior installation only per NEMA 1 rating. The PBC-3 is the three-button variant of the PBC flush-mount series, suitable for applications requiring full three-command (OPEN-CLOSE-STOP) control from a wall-mounted flush station.
A: The PBC-3 is designed for interior use only and carries a NEMA 1 rating, which provides no protection against moisture or dust ingress. It must not be installed in outdoor or wet locations.
A: Based on the PBC series pattern, the PBC-3 is designed to mount in a standard single-gang electrical box, flush with the wall surface. Exact cutout dimensions have not been confirmed from an official datasheet.
A: The PBC-3 provides three momentary contact outputs, typically configured for OPEN, CLOSE, and STOP functions, making it suitable for controlling gate and door operators that accept separate discrete momentary inputs.
A: The buttons are momentary contact type, meaning they only complete the circuit while physically pressed and immediately open again upon release. They do not latch or maintain a continuous signal.
A: Specific voltage and current ratings for the PBC-3 have not been confirmed from an official datasheet. As with similar low-voltage control stations in this category, it is likely rated for low-voltage dry-contact use, but consult MMTC or a verified distributor for confirmed electrical ratings before wiring.
[ITEMPRICE]
