Product Overview
The FTMT5030 is the front mount and pin assembly used at the gate end of compatible Mighty Mule, GTO and Linear swing gate opener arms. This part carries the operating load where the actuator pushes or pulls the gate, so it needs to match the arm, bracket angle and gate geometry. When the front mount is worn, cracked, bent or missing hardware, the arm can shift during travel, creating clicking, loose movement, uneven gate stopping, bracket wear, or stress on the actuator tube. Replacing the front mount is common during arm service, bracket repair, corrosion repair or after a gate has been hit. Because this mount works with the rest of the bracket system, it should be checked together with the post bracket, gate bracket, pivot hardware and gate hinges.
Compatible With
- Mighty Mule FM250, FM350, FM352, FM500, FM502 and FM600 swing gate opener applications.
- GTO / Linear PRO 1500, PRO 2500, PRO 2550, PRO SW3000 and PRO SW3200 related front mount listings.
- MM350, MM500 and MM502 series replacement part references.
- Verify by original mount style, actuator arm model, bracket layout and parts diagram.
Features & Specifications
| Manufacturer | Linear / GTO / Mighty Mule |
|---|
| Product Type | Front mount with pin |
|---|
| Part Number | FTMT5030 |
|---|
| Finish | Silver |
|---|
| Application | Gate-end actuator mounting for compatible swing gate openers |
|---|
| Compatible Operator Type | Select Mighty Mule, GTO and Linear swing gate opener arms |
|---|
| Included Components | Front mount with pin, when supplied as listed |
|---|
| Notes | Fitment depends on operator arm and bracket geometry |
|---|
Also Known As / Related Part Numbers
- FTMT5030
- GTO FTMT5030
- Mighty Mule FTMT5030
- Linear FTMT5030
- Front mount with pin
- Front Mount w/pin Silver
- Silver front mount
- FM500 front mount
- FM502 front mount
- FM350 front mount
Technician Note
If the old front mount failed because the gate is binding or the brackets are misaligned, replacing only the mount may not solve the problem. Check the gate swing and bracket geometry before operating the opener.
Before Ordering Checklist
- Confirm the actuator model and gate opener series.
- Compare the existing front mount shape and pin arrangement.
- Inspect the gate bracket and post bracket for bending or looseness.
- Check the gate hinges for sagging, drag or binding.
- Do not modify the bracket geometry to force a mismatched mount to fit.
Important Ordering Warnings
- FTMT5030 is a front mount part, not a complete arm assembly.
- Incorrect front mount geometry can damage the actuator or cause unreliable travel.
Professional Advisory
Secure the gate and disconnect power before removing arm mounting hardware. A heavy swing gate can move unexpectedly if the operator arm or mounting point is disconnected.
Product Questions & Answers
What does the FTMT5030 front mount do?
The FTMT5030 front mount provides the gate-end mounting point for the opener arm on compatible Mighty Mule and GTO swing gate operators.
Which models commonly use FTMT5030?
It is commonly listed for Mighty Mule FM250, FM350, FM352, FM500, FM502 and FM600, with related GTO/Linear SW3000, SW3200, 2500, 2550 and 1500 references.
Does the pin come with this front mount?
This listing is described as a front mount with pin in silver. Always compare the included hardware to your original parts before installation.
Can a worn front mount cause gate problems?
Yes. A worn or damaged front mount can allow the arm to shift, bind, rattle, lose travel accuracy or place extra stress on the actuator.
Is FTMT5030 universal for all swing gate openers?
No. It is a model-specific Mighty Mule / GTO style front mount. Verify the operator arm and bracket layout before ordering.
[ITEMPRICE]