BEA 10FALCON Industrial Microwave Motion Detector Technical Fitment and Compatibility Details
The BEA 10FALCON is the standard-mount model in the FALCON industrial motion sensor family. It uses microwave Doppler radar for motion activation on high-traffic commercial and industrial openings. Common applications include warehouse overhead doors, parking garage doors, vehicle gates, loading docks, factory entrances, and barrier arm activation where moving vehicles or pedestrians need hands-free triggering. The standard FALCON is for normal to high mounting, while the FALCON XL is for lower mounting heights and FALCON WIDE is for wider detection fields. This distinction matters because mounting the wrong FALCON version can cause poor detection, nuisance activation, or difficulty rejecting pedestrian traffic.
BEA’s FALCON FAMILY of sensors is the premier microwave
activation solution for indoor and outdoor industrial applications. The
family includes the FALCON, FALCON XL (extra low mount) and
FALCON WIDE (for wide detection areas).
The sensor is capable of providing pedestrian and parallel traffic
rejection, reducing unwanted detections and door cycles.
BEA’s FALCON FAMILY is ideal for automatic industrial doors,
vehicle gates / barriers, vehicle detection, loading docks or any other
industrial application where motion detection is required.
Housed in a IP65 rated enclosure, the FALCON FAMILY is designed
to operate in harsh environments
Common Applications
- Automatic industrial overhead door activation
- Vehicle gate and barrier arm motion activation
- Loading dock and warehouse bay traffic detection
- Factory entrance activation where moving objects need to be detected
- Parking garage doors and high-traffic commercial openings
Technical Specifications
| Specification | Manufacturer Specification |
|---|
| Technology | Microwave Doppler Radar |
|---|
| Radiated Frequency | 24.150 GHz |
|---|
| Transmitter Radiated Power | < 20 dBm EIRP |
|---|
| Radiated Power Density | < 5 mW / cm² |
|---|
| Detection Mode | Motion |
|---|
| Detection Zone | FALCON | FALCON XL | FALCON WIDE |
|---|
| Typical Detection Field | 13' × 16' @ 16' | 13' × 6 1/2' @ 8 1/5' | 30' × 11' @ 21' |
| Measurement Condition | Typical at 30° and field size 9 |
| Specification | Manufacturer Specification |
|---|
| Tilt Angles | 0 – 180° |
|---|
| Output | Relay (free of potential change-over contact) |
|---|
| Max. Contact Voltage | 42 VAC / VDC |
|---|
| Max. Contact Current | 1 A (resistive) |
|---|
| Max. Switching Power | 30 W (DC); 60 VA (AC) |
|---|
| Minimum Detection Speed | 2 in / s* |
|---|
| Mains Frequency | 50 – 60 Hz |
|---|
| Supply Voltage | 12 – 24 VAC; ±10%
12 – 24 VDC; +30% / -10% |
|---|
| Power Consumption | < 2 W |
|---|
| Mounting Height | FALCON | FALCON XL | FALCON WIDE |
|---|
| Specified Range | 11 1/2' – 23' | 6 1/2' – 11 1/2' | 11 1/2' – 21' |
| Specification | Manufacturer Specification |
|---|
| Dimensions | 3 3/4" (W) × 4" (H) × 5" (L) |
|---|
| Material | ABS & Polycarbonate |
|---|
| Temperature Range | -22 – 140°F |
|---|
| Degree of Protection | IP65 |
|---|
| Norm Conformity | EMC: 2004 / 108 / EC
R&TTE: 1999 / 5 / EC |
|---|
Compatible With
- BEA FALCON family standard mounting applications
- Mounting heights commonly listed for FALCON: 11.5 ft to 23 ft
- BEA 10REMOTE for remote programming
- BEA 10WBA universal mounting bracket, 10INDBRACKET/HDB industrial bracket, and 10MINIBRACKET when the mounting condition calls for them
- 12 to 24 VAC/VDC activation inputs that accept a dry relay contact from the sensor
- Not a replacement for IS40, IS40XL, IS40P, LZR-WIDESCAN, safety photo eyes, or monitored entrapment protection devices
Features and Specifications
| Brand | BEA |
|---|
| Part Number | 10FALCON |
|---|
| Product Type | Industrial microwave motion detector |
|---|
| Technology | Microwave Doppler radar |
|---|
| Detection Mode | Motion activation |
|---|
| Mounting Height | FALCON standard: 11.5 ft to 23 ft |
|---|
| Power | 12 to 24 VAC +/-10% or 12 to 24 VDC +30% / -10% |
|---|
| Frequency | 24.150 GHz |
|---|
| Output | Relay dry contact; max 42 VAC/VDC, 1 A resistive |
|---|
| Enclosure Rating | IP65 |
|---|
| Dimensions | Approx. 3-3/4 in W x 4 in H x 5 in L |
|---|
| Notes | Activation sensor only; separate safety devices may be required |
|---|
Also Known As / Related Part Numbers
- 10FALCON
- FALCON
- BEA Falcon
- BEA 10FALCON motion sensor
- FALCON family
- Related models: 10FALCONXL, 10FALCONW
- Programming accessory: 10REMOTE
Technician Notes
The FALCON only detects motion. It will not hold a door or gate open for a stopped object the way a presence sensor or safety device can. If the system needs entrapment protection, use the required monitored safety edge, photo eye, light curtain, or approved sensor configuration in addition to any activation sensor.
Before Ordering Checklist
- Confirm mounting height is within the standard FALCON range
- Use FALCON XL instead for low mounting heights around 6.5 ft to 11.5 ft
- Confirm the control input accepts the sensor relay output
- Check power supply voltage before wiring
- Plan a separate monitored safety device where required by code and operator design
Professional Advisory
Safety edge and sensor wiring affects entrapment protection. Do not bypass a required monitored safety input or substitute a non-monitored device where the operator requires monitored protection. For commercial doors, vehicular gates, high-voltage controls, or any unsafe movement condition, have the system inspected and tested by a qualified door or gate technician.
Product Questions and Answers
What is the BEA 10FALCON used for?
It is used as a microwave motion activation sensor for automatic industrial doors, gates, barriers, loading docks, and similar openings.
What mounting height is the standard FALCON for?
The standard FALCON is commonly listed for 11.5 ft to 23 ft mounting heights. For lower mounting, use the FALCON XL family instead.
Will the FALCON detect a stopped vehicle?
No. It is a motion sensor. A stopped object may not remain detected, so it should not be used as a stand-alone safety presence device.
Can the 10REMOTE program this sensor?
Yes. The BEA 10REMOTE is a compatible programming remote for the FALCON family.
What causes nuisance activation on a FALCON?
Common causes include incorrect mounting height, sensing the moving door, vibration, air curtains, fans, or a detection field that is too large for the opening.
