BEA 10FALCON XL Low-Mount Microwave Motion Detector Technical Fitment and Compatibility Details
The BEA 10FALCON XL is built for low mounting heights where a standard FALCON may not provide the correct detection pattern. It is commonly used on shorter industrial doors, dock openings, equipment rooms, parking structures, and gate or barrier areas where the sensor is installed around 6.5 ft to 11.5 ft above the target zone. Like the standard FALCON, it is a microwave motion activation sensor and can be configured for directional movement and filtering. The main compatibility issue is mounting height. Installing a standard FALCON too low, or an XL too high, can lead to missed vehicles, false triggers, or poor pedestrian rejection.
Common Applications
- Low-mount industrial door activation
- Warehouse and dock openings with limited header height
- Vehicle gate and barrier activation where a lower sensor position is required
- Parking garage and commercial door motion triggering
- Retrofits where the old sensor label or installation height points to FALCON XL
Compatible With
- BEA FALCON XL low mounting applications
- Mounting heights commonly listed for FALCON XL: 6.5 ft to 11.5 ft
- BEA 10REMOTE programming remote
- BEA 10WBA, 10INDBRACKET/HDB, and 10MINIBRACKET mounting accessories when applicable
- 12 to 24 VAC/VDC controls accepting a dry relay output
- Not a direct substitute for standard FALCON at higher mounting heights or FALCON WIDE on wide openings
Features and Specifications
| Brand | BEA |
|---|
| Part Number | 10FALCON XL |
|---|
| Product Type | Low-mount industrial microwave motion detector |
|---|
| Technology | Microwave Doppler radar |
|---|
| Detection Mode | Motion activation |
|---|
| Mounting Height | FALCON XL: 6.5 ft to 11.5 ft |
|---|
| Power | 12 to 24 VAC +/-10% or 12 to 24 VDC +30% / -10% |
|---|
| Frequency | 24.150 GHz |
|---|
| Output | Relay dry contact; max 42 VAC/VDC, 1 A resistive |
|---|
| Enclosure Rating | IP65 |
|---|
| Notes | Low mounting version of FALCON family |
|---|
Also Known As / Related Part Numbers
- 10FALCON XL
- 10FALCONXL
- FALCON XL
- BEA Falcon XL
- BEA low mount FALCON
- Related models: 10FALCON, 10FALCONW
- Programming accessory: 10REMOTE
Technician Notes
Do not choose FALCON XL just because the sensor looks similar to the standard FALCON. The detection field and mounting range are different. Use the actual mounting height and desired field coverage to select the correct version.
Before Ordering Checklist
- Measure the sensor mounting height before ordering
- Use standard 10FALCON for higher mounting heights
- Check whether the opening requires a wide field version instead
- Confirm the controller accepts a dry relay activation signal
- Use separate monitored safety devices where required
Professional Advisory
Safety edge and sensor wiring affects entrapment protection. Do not bypass a required monitored safety input or substitute a non-monitored device where the operator requires monitored protection. For commercial doors, vehicular gates, high-voltage controls, or any unsafe movement condition, have the system inspected and tested by a qualified door or gate technician.
Product Questions and Answers
How is the FALCON XL different from the standard FALCON?
The FALCON XL is the low-mount version. It is commonly listed for 6.5 ft to 11.5 ft mounting heights, while the standard FALCON is for higher mounting.
Can FALCON XL be used on a high industrial door?
Usually no. For higher mounting, the standard FALCON or another sensor family should be selected based on the opening.
Is the 10FALCON XL a safety presence sensor?
No. It is a motion activation sensor and should not replace a required monitored edge, photo eye, light curtain, or presence sensor.
Can the BEA 10REMOTE adjust this sensor?
Yes. The 10REMOTE is a compatible programming remote for the FALCON family.
What happens if the wrong FALCON version is installed?
The sensor may miss vehicles, detect pedestrians when not desired, or falsely activate from door movement or vibration.
