BEA 10REMOTE Universal Sensor Programming Remote Technical Fitment and Compatibility Details
The BEA 10REMOTE is a universal remote control for programming compatible BEA sensors. It is used by installers and service technicians to configure detection fields, motion filters, relay behavior, lock codes, and setup routines depending on the sensor family. It is especially useful on high-mounted sensors such as FALCON, IS40, Eagle, and LZR products because settings can be changed from the ground. This remote should not be confused with a gate opener remote or access control transmitter. It does not open a gate by itself and does not replace a receiver. Its compatibility depends on whether the BEA sensor supports the 10REMOTE programming interface.
Common Applications
- Programming compatible BEA motion, presence, laser, and infrared sensors
- Adjusting high-mounted industrial sensors from the ground
- Service work on FALCON, IS40, Eagle, LZR, IXIO, and ULTIMO sensor families
- Changing detection field size, filtering, and setup parameters where supported
- Removing or managing lock codes on compatible BEA sensors when documented
Compatible With
- BEA FALCON family including 10FALCON, 10FALCONXL, 10FALCONW, and FALCON EX where supported
- BEA IS40 / XL and IS40P sensor families
- BEA Eagle and Eagle HM family sensors where remote programming is supported
- BEA LZR-WIDESCAN, LZR-H100, LZR-I30, LZR-S600, LZR-FLATSCAN A/S/SW/REV PZ families
- BEA IXIO-DT1, IXIO-DT1 Industrial, IXIO-DT1V, IXIO-ST, and IXIO-ST Industrial
- BEA ULTIMO, BEAMBOX, BODYGUARD-T, PHOENIX EX, SPARROW, and other compatible BEA remote-programmable sensors
- Not compatible with standard garage/gate remote receivers as an access transmitter
Features and Specifications
| Brand | BEA |
|---|
| Part Number | 10REMOTE |
|---|
| Product Type | Sensor programming remote |
|---|
| Application | Adjusts compatible BEA sensors |
|---|
| Technology | Infrared programming interface for supported sensors |
|---|
| Compatible Product Families | FALCON, IS40, Eagle, LZR, IXIO, ULTIMO, BEAMBOX, BODYGUARD-T, SPARROW, and related BEA sensors |
|---|
| Not For | Not a gate remote, garage door remote, or access transmitter |
|---|
| Included Components | Remote control only unless packaging states otherwise |
|---|
| Notes | Sensor must support 10REMOTE programming |
|---|
Also Known As / Related Part Numbers
- 10REMOTE
- BEA 10REMOTE
- BEA universal remote control
- BEA sensor programming remote
- Falcon remote
- Eagle remote
- DK-12 reference in older product descriptions
- Iris/Falcon programming remote reference
Technician Notes
The 10REMOTE is for BEA sensor adjustment only. If a customer is trying to open a gate, program a receiver, or replace a hand-held access remote, this is the wrong type of remote. If the sensor is locked with a code, the unlock procedure may need to be performed before changes are accepted.
Before Ordering Checklist
- Confirm the device being programmed is a BEA sensor that supports 10REMOTE
- Do not order this as a gate opener or garage door transmitter
- Check whether the sensor has a lock code enabled
- Keep the remote aimed at the sensor face during programming
- Record original settings before changing detection fields or outputs
Professional Advisory
Safety edge and sensor wiring affects entrapment protection. Do not bypass a required monitored safety input or substitute a non-monitored device where the operator requires monitored protection. For commercial doors, vehicular gates, high-voltage controls, or any unsafe movement condition, have the system inspected and tested by a qualified door or gate technician.
Product Questions and Answers
Is the BEA 10REMOTE a gate opener remote?
No. It is a programming remote for compatible BEA sensors. It does not transmit access codes to a gate receiver.
Which BEA sensors can it program?
It is compatible with many BEA sensor families including FALCON, IS40 / XL, IS40P, Eagle, LZR, IXIO, ULTIMO, BEAMBOX, BODYGUARD-T, SPARROW, and others that support the BEA remote interface.
Why will my sensor not respond to the 10REMOTE?
The sensor may not support remote programming, may be locked with a code, may not be powered, or the remote may not be aimed at the sensor correctly.
Can this remote adjust detection filters?
Yes, on compatible sensors it can adjust settings such as detection fields, rejection filters, setup values, and outputs depending on the model.
Should every installer keep one?
For shops servicing BEA sensors regularly, a 10REMOTE is a useful tool because many high-mounted sensors are much easier to adjust from the ground.
