BEA IS40 Motion and Presence Industrial Door Sensor Technical Fitment and Compatibility Details
The BEA IS40 is a motion and presence sensor family for industrial doors. It pairs microwave Doppler motion detection with active infrared presence sensing, allowing one device to activate an opening and provide a defined infrared presence zone. The sensor is frequently used at loading docks, factory entrances, high-performance doors, and industrial vehicle paths where pedestrian and vehicle traffic can be separated through setup. The standard IS40 is designed for 8 ft to 16 ft mounting. The related IS40XL is for lower mounting heights, and IS40P is a presence-focused version. Correct selection depends on mounting height, detection goal, power, relay inputs, and whether the operator requires monitored entrapment protection from a separate approved safety device.
Common Applications
- Industrial door motion and presence detection
- Loading dock and warehouse openings
- Vehicle detection at industrial doors where presence functionality is needed
- Applications where microwave activation and active infrared sensing are both required
- Service replacement where the existing sensor is an IS40 family unit
Compatible With
- BEA 10IS40 standard mounting applications
- Standard IS40 mounting heights commonly listed at 8 ft to 16 ft
- Related BEA 10IS40XL low-mount applications from 6.5 ft to 11.5 ft
- BEA 10REMOTE and 10SPOTFINDER setup accessories
- BEA 10WBA, 10INDBRACKET/HDB, and 10MINIBRACKET mounting accessories
- 12 to 24 VAC/VDC controls that accept the relay outputs
- Not a direct replacement for FALCON motion-only sensors or IS40P presence-only applications without reviewing the function needed
Features and Specifications
| Brand | BEA |
|---|
| Part Number | IS40 / 10IS40 family reference |
|---|
| Product Type | Industrial motion and presence sensor |
|---|
| Technology | Microwave Doppler radar and active infrared |
|---|
| Detection Mode | Motion and presence |
|---|
| Mounting Height | IS40: 8 ft to 16 ft; IS40XL: 6.5 ft to 11.5 ft |
|---|
| Power | 12 to 24 VAC +/-10% or 12 to 24 VDC +30% / -10% |
|---|
| Frequency / Wavelength | 24.150 GHz radar / 875 nm infrared |
|---|
| Output | Two relay outputs, max 42 VAC/VDC, 1 A resistive |
|---|
| Enclosure Rating | NEMA 4 / IP65 |
|---|
| Cable Length | Approx. 32 ft |
|---|
| Notes | Confirm IS40 vs IS40XL vs IS40P before ordering |
|---|
Also Known As / Related Part Numbers
- IS40
- 10IS40
- BEA IS40
- BEA IS40XL - related low-mount model
- 10IS40XL
- IS40P - related presence model, not the same function
- 10REMOTE
- 10SPOTFINDER
Technician Notes
The IS40 family must be selected by function and mounting height. A system that only needs motion activation may use a FALCON, while a system that needs motion plus active infrared presence may require IS40. A presence-only application may call for IS40P instead.
Before Ordering Checklist
- Confirm whether the installed unit is IS40, IS40XL, or IS40P
- Measure mounting height before choosing the version
- Check power supply voltage and relay input requirements
- Review whether the application needs motion, presence, or both
- Do not remove or bypass separate monitored safety devices required by the operator
Professional Advisory
Safety edge and sensor wiring affects entrapment protection. Do not bypass a required monitored safety input or substitute a non-monitored device where the operator requires monitored protection. For commercial doors, vehicular gates, high-voltage controls, or any unsafe movement condition, have the system inspected and tested by a qualified door or gate technician.
Product Questions and Answers
What does the BEA IS40 detect?
The IS40 combines microwave motion detection with active infrared presence detection for industrial door applications.
What mounting height is the standard IS40 for?
The standard IS40 is commonly listed for 8 ft to 16 ft mounting heights. The IS40XL is the related low-mount version.
Is IS40 the same as IS40P?
No. IS40 provides motion and presence detection, while IS40P is a presence sensor with virtual loop functionality.
Can the 10REMOTE program the IS40?
Yes. The BEA 10REMOTE is a compatible programming remote for the IS40 / XL family.
Why would the red LED stay on?
On IS40 applications, a red presence indication can mean the active infrared field is in detection or has not been set up correctly. Field setup and sensor alignment should be checked.
