Miller Edge Cegard-Max-Cover Light Curtain Shield Kit, One Side Only
The Miller Edge Cegard-Max-Cover is a light curtain shield kit for one side of a compatible Cegard-Max installation. It is an accessory that helps protect the mounted light curtain edge, but it does not replace the transmitter, receiver, cable, or control components. The one-side listing is important: if both sides of the opening need shielding, additional cover material may be required. Use it only with the Cegard-Max family and verify the mounting side, height, and clearances before installation.
Common Applications and Replacement Reasons
- Used to protect one side of a compatible Cegard-Max light curtain
- Does not repair electrical, cable, transmitter, receiver, or alignment faults
- Important to confirm one-side versus two-side coverage before ordering
Features & Specifications
| Manufacturer | Miller Edge |
|---|
| Product Type | Light curtain shield kit |
|---|
| Part Number | Cegard-Max-Cover |
|---|
| Product Family | Cegard-Max |
|---|
| Application | Protective cover for one side of a Cegard-Max light curtain |
|---|
| Coverage | One side only |
|---|
| Compatible Products | Compatible Cegard-Max long range light curtain installations |
|---|
| Included Components | Shield kit only |
|---|
| Mounting Style | Application-dependent; verify site mounting and clearance |
|---|
| Notes | Not a transmitter, receiver, or cable extension |
|---|
Compatible With
- Miller Edge Cegard-Max long range light curtain installations where one side requires a shield
- Cegard-Max-114NA-W-IP65 installations when cover size and mounting match
- Cegard-Max-114NA-W-IP67 installations when cover size and mounting match
- Use one cover per side requiring protection; two sides may require two kits
- Not a replacement for Cegard-Max-RX-EXT-10 receiver cable extension
- Not intended for IG2, Invisi-Guard-2, Cegard/Mini, or standard photo eye housings unless documented by the manufacturer
- Not a substitute for a failed transmitter, receiver, or alignment repair
Also Known As / Related Part Numbers
- Cegard-Max-Cover
- Cegard Max Cover
- Cegard-Max light curtain cover
- Cegard-Max shield kit
- Miller Edge light curtain shield kit
- One-side Cegard-Max cover
- Related: Cegard-Max-114NA-W-IP65
- Related: Cegard-Max-114NA-W-IP67
- Related but different: Cegard-Max-RX-EXT-10
Technician Note
Because this is a one-side shield kit, confirm whether the job needs protection on the transmitter side, receiver side, or both. The cover must not block the optical field or interfere with alignment.
Before Ordering Checklist
- Confirm the installed light curtain is from the Cegard-Max family
- Confirm which side of the opening needs the cover
- Check the light curtain height and available mounting clearance
- Plan for two covers if both transmitter and receiver sides need shielding
- After installation, confirm the light curtain still detects across the full opening
Professional Advisory
A protective cover should never be installed in a way that blocks or weakens the light curtain detection field. If alignment changes after cover installation, have the system adjusted and tested by a qualified technician.
Product Questions and Answers
What is included with the Cegard-Max-Cover?
It is a light curtain shield kit for one side of a compatible Cegard-Max installation.
Do I need one cover or two covers?
This listing is for one side only. If both transmitter and receiver sides need protection, the job may require two covers.
Does this cover replace the light curtain?
No. It is only a protective shield kit and does not replace the transmitter, receiver, cable, or control components.
Will this fit IG2 or Invisi-Guard-2 photo eyes?
Do not assume it will. This cover is written for Cegard-Max light curtain installations, not IG2 or other photo eye families.
Can the cover affect light curtain operation?
Yes, if it is installed incorrectly. The shield must not block the beams or disturb alignment, and the detection field should be tested after installation.
