| Description |
Miller Edge RG-K-P Retro Reflective Guard, 30' Pulsed Output Kit Photo System The Reflecti-Guard monitored retro-reflective photo optic system functions as a protective barrier guarding a hazard or entrapment zone. The unit combines an emitter and receiver in the same housing. The reflector returns the light beam to the unit. When the light beam is interrupted by an obstruction, a signal is sent to the operator to stop or reverse motion.
To assist installers, a visible red beam eases alignment to the reflector.
Functional Benefits - Several models designed to work with pre- and post-2010 door operators and pre- and post-2016 gate operators
- Spans distances up to 30
- Vertical mounting
- Easy, time-saving installation with alignment LED
- UL 325 Recognized Component for doors and gates
- NEMA 4 enclosure
- Impact resistant for rugged environments
- Enhanced sunlight immunity
- Built-in strain relief
Specifications
Physical
- Emitter Dimensions: 5.1 H x 1.8 W x 2.8 D
- Reflector Dimensions: 4.6 H x 1.2 W
- Emitter/Receiver Weight: 11.6 oz.
- Reflector Weight: 4.5 oz.
- Enclosure Material: Aluminum
- Mounting Method: Wall, floor, post
- Alignment Indicator: Front mounted Green LED
- Maximum Range: 30'
- Fault Indicator: Top red LED
- Reflector: MEI authorized, rectangular, corner cube retro reflector
Mechanical
- Detection Technology: Visible red retro-reflective
- Operating Temp. Range: -40oF to 185oF | -40oC to +85oC
- Enclosure Material: Aluminum
- Wavelength: 625 nm
- Response Time: <18 msec
- Alignment Angle: ±8°
- Current Consumption: 50 mA
Technical Specifications
RG-R (N.C., 10K, N.O.)
- Power-On Indicator: Top solid green LED
- Power Supply: 7-30 VAC/10-42 VDC
- Opto Relay Rating: N/A
- Mechanical Relay Rating: 1 A @ 24 VDC
RG-P (4-Wire Pulsed)
- Power-On Indicator: Top solid blue LED
- Power Supply: 7-30 VAC/10-42 VDC
- Opto Relay Rating: 120 mA @ 350 VDC
- Mechanical Relay Rating: N/A
RG-P (2-Wire Pulsed)
- Power-On Indicator: Top solid blue LED
- Power Supply: Operator monitored input terminals
- Opto Relay Rating: 120 mA @ 350 VDC
- Mechanical Relay Rating: N/A
Warranty
Miller Edge, Inc. will replace within two years of shipment from the factory, any Reflecti-Guard subject to normal use, which is found to have defective materials or workmanship, as determined solely by our factory representative. Replacements will be shipped to you freight collect. This warranty is void where evidence of misuse or abuse is present. |
|
