My Account  |  0 item(s)    View Cart
Home > Safety Edges > Miller Edge
Miller Edge RG-K-R Retro Reflective Guard, 30' Relay Output Kit Photo System
Miller Edge RG-K-R Retro Reflective Guard, 30' Relay Output Kit Photo System
Email a friend Email a friend
Add to Wish List Add to Wish List
Share |

Miller Edge RG-K-R Retro Reflective Guard, 30' Relay Output Kit Photo System

Item Id: ME-RG-K-R
review 1 Review(s)
4
Write a Review Write a Review
Your Price: $187.62
Quantity
Description

Miller Edge RG-K-R Retro Reflective Guard, 30' Relay Output Kit Photo System

The Reflecti-Guard monitored retro-reflective photo optic system functions as a protective barrier guarding a hazard or entrapment zone. The unit combines an emitter and receiver in the same housing. The reflector returns the light beam to the unit. When the light beam is interrupted by an obstruction, a signal is sent to the operator to stop or reverse motion.


To assist installers, a visible red beam eases alignment to the reflector.

Functional Benefits

  • Several models designed to work with pre- and post-2010 door operators and pre- and post-2016 gate operators
  • Spans distances up to 30
  • Vertical mounting
  • Easy, time-saving installation with alignment LED
  • UL 325 Recognized Component for doors and gates
  • NEMA 4 enclosure
  • Impact resistant for rugged environments
  • Enhanced sunlight immunity
  • Built-in strain relief
Specifications

Physical

    • Emitter Dimensions: 5.1 H x 1.8 W x 2.8 D
    • Reflector Dimensions: 4.6 H x 1.2 W
    • Emitter/Receiver Weight: 11.6 oz.
    • Reflector Weight: 4.5 oz.
    • Enclosure Material: Aluminum
    • Mounting Method: Wall, floor, post
    • Alignment Indicator: Front mounted Green LED
    • Maximum Range: 30'
    • Fault Indicator: Top red LED
    • Reflector: MEI authorized, rectangular, corner cube retro reflector
Mechanical

    • Detection Technology: Visible red retro-reflective
    • Operating Temp. Range: -40oF to 185oF | -40oC to +85oC
    • Enclosure Material: Aluminum
    • Wavelength: 625 nm
    • Response Time: <18 msec
    • Alignment Angle: ±8°
    • Current Consumption: 50 mA
Technical Specifications

RG-R (N.C., 10K, N.O.)

    • Power-On Indicator: Top solid green LED
    • Power Supply: 7-30 VAC/10-42 VDC
    • Opto Relay Rating: N/A
    • Mechanical Relay Rating: 1 A @ 24 VDC
RG-P (4-Wire Pulsed)

    • Power-On Indicator: Top solid blue LED
    • Power Supply: 7-30 VAC/10-42 VDC
    • Opto Relay Rating: 120 mA @ 350 VDC
    • Mechanical Relay Rating: N/A
RG-P (2-Wire Pulsed)

    • Power-On Indicator: Top solid blue LED
    • Power Supply: Operator monitored input terminals
    • Opto Relay Rating: 120 mA @ 350 VDC
    • Mechanical Relay Rating: N/A
Warranty

Miller Edge, Inc. will replace within two years of shipment from the factory, any Reflecti-Guard subject to normal use, which is found to have defective materials or workmanship, as determined solely by our factory representative. Replacements will be shipped to you
freight collect. This warranty is void where evidence of misuse or abuse is present.

Customer Reviews
Rating Not what you see in the picture - but works.
There are actually 2 of the devices in the box, an emitter and a receiver, not a reflector. One is wired, the other is battery operated. Mounting and getting it working is easy, and it works just fine, but the picture is misleading.
Reviewed by: from Dallas, TX. on 7/17/2020
4/5
Browse Similar Items