Miller Edge SAH-093 Silicone Air Hose 3/32" ID, 1/8" Wall - 100ft
The Miller Edge SAH-093 silicone air hose is a small 3/32 in. inside-diameter hose used in select Air-Wave lead hose and sensing edge applications. Its silicone material is flexible and useful where the original assembly was built around small air tubing rather than larger gum rubber hose.
SAH-093 should be selected by the original part number, hose material, and inside diameter. It is not interchangeable with RAH-375, RAH-500, RAH-750, or HRH-375 hose.
Compatible With
- Miller Edge Air-Wave configured sensing edges requiring 3/32 in. silicone lead hose
- Select Miller Edge MBSAW style Air-Wave edge applications that specify 3/32 in. silicone lead hose
- AW10, AW12A, and AW14 Air-Wave switch applications when the system uses 3/32 in. lead tubing
- Small air line connections in non-monitored Air-Wave sensing edge assemblies
- Not a direct substitute for RAH-375, RAH-500, RAH-750, HRH-375, P-50, P-50H, P-75, or P-75H components
Features & Specifications
| Manufacturer | Miller Edge |
|---|
| Product Type | Silicone air hose |
|---|
| Part Number | SAH-093 |
|---|
| Application | Small-diameter Air-Wave lead hose and sensing edge air line |
|---|
| Material | Silicone |
|---|
| Size | 3/32 in. inside diameter, 1/8 in. wall |
|---|
| Length | 100 ft. |
|---|
| Compatible Switch Family | AW10, AW12A, and AW14 Air-Wave systems when configured for 3/32 in. tubing |
|---|
| Monitoring Type | Non-monitored system component |
|---|
| Notes | Match original material and tubing diameter before ordering |
|---|
Also Known As / Related Part Numbers
- SAH-093
- SAH093
- SAH 093
- Miller Edge silicone air hose
- 3/32 in. silicone air hose
- Air-Wave lead hose
- MBSAW lead hose related component
Technician Note
SAH-093 is a small lead hose, not a large edge bladder hose. A visual match is not enough; use the original Miller Edge drawing, edge label, or hose measurement to confirm 3/32 in. silicone tubing.
Before Ordering Checklist
- Confirm the original hose is 3/32 in. inside diameter.
- Confirm the original hose material is silicone.
- Check whether the edge is an Air-Wave configuration rather than a pneumatic PS20A hose kit.
- Inspect the tubing route for pinching, cracking, or loose connections.
- Confirm the switch responds correctly after the hose is replaced.
Professional Advisory
If a door or gate edge does not reverse consistently after air hose replacement, stop operation and have the air switch, adjustment, wiring, and safety input tested by a qualified technician.
Product Questions & Answers
Q: What is SAH-093 used for?
A: SAH-093 is a 3/32 in. silicone air hose used in select Miller Edge Air-Wave lead hose and sensing edge applications.
Q: Is SAH-093 the same as RAH hose?
A: No. SAH-093 is small silicone hose, while RAH hose is larger gum rubber air hose available in 3/8 in., 1/2 in., and 3/4 in. sizes.
Q: Can SAH-093 be used with AW10, AW12A, or AW14?
A: Yes, when the Air-Wave system is configured for 3/32 in. lead tubing and the connection style matches.
Q: Is SAH-093 used with P-50 plugs?
A: No. P-50 and P-50H plugs are for RAH-375 and RAH-500 gum rubber hose, not 3/32 in. silicone hose.
Q: Is SAH-093 monitored?
A: No. It is tubing used in a non-monitored air-activated edge system.
