 |
Mighty Mule AQ201 Receiver Assembly with Antenna50 |
| Mighty Mule Receiver, Mighty Mule AQ201 Receiver Assembly with Antenna. Compatible with all Mighty Mule DC gate operators and narrow band transmitters (gray style). TheAQ201 comes standard with all DC swing gate operators. |
|
|
|
GTO RB709 UNB Universal Receiver - 318Hmz52 |
| GTO Receiver, GTO RB709 UNB Universal Receiver, GTO Garage Door Opener. GTO PRO GTO RB709 UNB Universal Receiver - 318Hmz. Compatible with all GTO AC gate operators and narrow band transmitters. The RB709U-NB is recommended for all GTO AC gate operators. Measures 3-1/2"H x 2-3/8"W x 1-1/2"D, with a 11" antenna and 10' cable. |
|
|
|
Mighty Mule AQ201-NB Narrow Band Receiver - 10 Feet Cable (Grey)54 |
| Mighty Mule Receivers, Mighty Mule AQ201-NB Narrow Band Receiver - 10 Feet Cable (Grey). Works with all Mighty Mule DC gate operators and narrow band transmitters (gray style). The AQ201-NB comes standard with all DC swing gate operators. The AQ201-NB comes standard with all DC slide gate operators. Measures 2"H x 2-3/8"W x 15/16"D, with a 10" antenna and with 10' of Cable. |
|
|
|
Mighty Mule RB709 UNB Universal Receiver - 318Hmz267 |
| Mighty Mule RB709 UNB Universal Receiver - 318Hmz. The Mighty Mule Universal Receiver allows the GTO / Mighty Mule two and three button transmitters to control both gate and garage door openers. Compatible with most garage door opener systems. |
|
|
|
GTO AQ201 Receiver Assembly with Antenna268 |
| GTO Receivers for Gate Opener, GTO AQ201 Receiver Assembly with Antenna. GTO PRO GTO AQ201 Receiver Assembly with Antenna . GTO AQ201 Receiver Assembly with Antenna. Compatible with all GTO DC gate operators and narrow band transmitters (gray style). The AQ201 comes standard with all DC swing gate operators. |
|
|
|
GTO AQ201-NB Narrow Band Receiver - 10 Feet Cable (Grey)271 |
| GTO AQ201 - NB, GTO Gate Receiver Assembly with Antenna and 10' Cable. GTO PRO GTO AQ201-NB Narrow Band Receiver - 10 Feet Cable (Grey). Works with all GTO DC gate operators and narrow band transmitters (gray style). The AQ201-NB comes standard with all DC swing gate operators. The AQ201-NB comes standard with all DC slide gate operators. Measures 2"H x 2-3/8"W x 15/16"D, with a 10" antenna and with 10' of Cable. |
|
|
 |
Sentry 300 Garage Receiver 030209969 |
| Sentry 300 Garage Receiver 030209 is used to make your garage door opener compatible with the Sentry transmitters, reduce the devices in your car. The kit contains receiver, transformer and a wire harness that easily installs to the existing garage door |
| Availability: Not for Sale |
|
|
|
|
|
|
 |
Mega Code / Linear Delta-3 (DRA/DNR00001) 24v Radio Receiver for Linear Opener1257 |
| The Linear Delta-3 model DR also known as the DR3A is a standard one channel, 24-volt, three terminal, wire lead antenna gate or garage door opener radio receiver part number DNR00001. This radio receiver works with all the Linear Delta-3 or Moore-O-Matic 8 DIP (on/off) code switch remotes on the 310MHz frequency. With the industry standard 3 terminal screw connector, it can connect directly to most older garage door openers or gate openers that use the standard 12 volt, 3 terminal connection using the adapter tabs included, or it can be powered by the optional Linear TF524 plug-in ac power adapter (sold separately). Controls one gate or garage door opener |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Liftmaster 850LM Receiver -Security 2.0 Gate Opener / Operator / Overhead Door Receiver2541 |
| Designed for both gated communities and commercial buildings, the Universal Receiver and accompanying remote controls feature Security+ 2.0™ technology. It utilizes a new, innovative and esclusive narrow band multi-frequency radio, which virtually eliminates radio interference, and eliminates customer call backs due to poor range performance. Property managers can support and manage multiple access points, such as the main gate, tenant and visitor doors, commercial doors, and even parking entrances, all with a single remote control solution that offers superior range and security |
|
|
 |
Liftmaster 860LM Weather Resistant Receiver -Liftmaster Security 2.0 Gate Opener / Operator / Overhead Door Receiver2542 |
| Designed for both gated communities and commercial buildings, the Universal Receiver and accompanying remote controls feature Security+ 2.0™ technology. It utilizes a new, innovative and esclusive narrow band multi-frequency radio, which virtually eliminates radio interference, and eliminates customer call backs due to poor range performance. Property managers can support and manage multiple access points, such as the main gate, tenant and visitor doors, commercial doors, and even parking entrances, all with a single remote control solution that offers superior range and security |
|
|
 |
Liftmaster 855LM HomeLink® Repeater Kit HOMELINK RPTR2636 |
| The HomeLink® Repeater Kit is designed to allow compatibility between a new Chamberlain, Sears Craftsman, or LiftMaster* garage door opener and the HomeLink® system in your vehicle. Refer to the your vehicle owner's manual for specific instructions on programming the HomeLink® system |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Linear DNR00102 / GRD2 12/24V AC/DC 310MHz Delta 3 2-Channel Gate Radio Receiver4554 |
| The GRD-2 is a 2-channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the Delta-3 radio format, with 256 possible codes for each channel, set by dipswitch. |
|
|
|
|
|
|
 |
Linear DNR00100 / MDR-U 110V AC 318MHz MegaCode NO 1-Channel Plug-in Receiver4569 |
| The Model MDR/U 1-Channel Plug-in Receiver is a versatile (universal) receiver that makes it very easy to equip nearly any garage door operator for use with Linear’s popular MegaCode format transmitters. MegaCode uses a frequency of 318 MHz and features over one million radio codes to all but eliminates any possibility of code duplication. It offers simplified programming via the receiver’s learn mode. |
|
|
|
|
 |
Linear DNR00105 / MGR-2 318MHz 12/24V MegaCode 2-Channel Wireless Gate Receiver4571 |
| The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver. |
|
|
|
|
|
|
 |
Linear MCS106603 Omni-directional Remote Whip Antenna, F Connector & 15ft Cable4582 |
| The Model 106603 Remote Whip Antenna is designed as a remotely mounted antenna. This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable. |
|
|
|
|
 |
Linear MCS109201 Wiring Harness Power Adapter Transformer 3 to 2 Terminal Block4585 |
| The Model 109201 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts 3-terminal receivers to 2-terminal operators. The harness includes a pre-wired 3-position terminal block, 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals. |
|
|
 |
Linear MCS109207 Wiring Harness Power Adaptor Transformer 3 to 2 Terminal Block4587 |
| The Model 109207 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts Multi-Code 109020 and 309013 3-terminal receivers with push-on terminals to 2-terminal operators. The harness is prewired with three push-on terminals, a 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals. |
|
|
 |
Linear MCS109920 300MHz 10 Dip Switch 1-Channel 110V AC Gate Radio Receiver4591 |
| The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used. |
|
|
|
|
|
|
|
|
|
|
