| Description |
SECO-LARM Enforcer EFR-E-931-S33PRGQ 33Ft Polarized Reflective Photoelectric IR Beam Sensor
The E-931-S33PRGQ 33ft Polarized Reflective Photoelectric Beam Sensor provides reliable detection of shiny objects that could be missed by a non-polarized sensor.
Descriptions - Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected.
- Weatherproof (IP55).
- Anti-condensation housing.
- 12-30V DC/AC 60Hz, 100mA.
- Up to 33ft (10m) sensing range.
- Round reflector, Diameter: 3-1/4" (82mm).
- Form C relay: 500mA@30VAC/VDC.
- Beam status LED.
- Compact size: 4-13/16"x2-3/8"x2-7/16" (122x60x62mm).
- N.C. Tamper switch: 500mA@30VAC/VDC.
- Monitored Outputs: N.C., 10kO Resister.
Typical Applications - Sensor for garage doors, outdoor gates or overhead doors.
- Sensor for industrial automation to detect objects on manufacturing line.
| | | Model Number | E-931-S33PRGQ | | Type | Reflective photoelectric beam sensor | | Sensing Range | Up to 33' (10m) | | Operating voltage | 12-30V DC/AC 60Hz, 100mA | | Current draw | Standby | 55mA@12VDC | | Active | 40mA@12VDC | | Response Time | 10ms | | Light Source | IR LED/Wavelength 740nm | | LEDs | Solid green | Good beam signal, properly aligned | | Alternating flash | Poor beam signal | | Solid red | No beam signal, triggered | | Trigger Output | SPDT relay output (NO/NC/COM) | | Switching Capacity | 500mA@30VAC/VDC | | Tamper Switch | N.C., 500mA@30VAC/VDC | | IP Rating | IP55 Waterproof | | Operating Temp | -4º~131º F (-20º~55º C) |
|
|
|
|
