|
|
|
|
 |
Liftmaster CPS Commercial Protector System2451 |
| The Commercial Protector System® provides protection on doors up to 45 feet wide. Contains emitter, receiver, mounting brackets, and operator interface. 24VAC, use CPS-L if Solid State Logic 3 or Medium-Duty Logic Control Board unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
EMX WEL-200-RX WIRELESS EDGE LINK RECEIVER ONLY COMPATIBLE w/ NC, 10K AND PULSE5603 |
| The WEL-200 system provides a complete wireless solution for interfacing sensing edges with gate and door operators. This wireless edge link eliminates the wiring between the safety edge and operator control box while ensuring compliance with 2018 UL325 monitoring standards. The WEL-200 operates up to 200 feet line of sight between transmitter and receiver. The receiver connects with up to four transmitters with separate relay and pulse outputs for open and close edge functionality. The transmitter for the WEL-200 is compatible with both 8.2K and 10K monitored safety edges. FEATURES OF OUR WEL-200 WIRELESS EDGE LINK UL325-2018 compliant Operating range up to 200 ft. (61 m) Operating frequency 915 MHz NEMA 4X enclosures |
|
|
 |
EMX WEL-200-TX WIRELESS EDGE LINK TRANSMITTER COMPATIBLE w/ NC, 10K AND PULSE5604 |
| The WEL-200 system provides a complete wireless solution for interfacing sensing edges with gate and door operators. This wireless edge link eliminates the wiring between the safety edge and operator control box while ensuring compliance with 2018 UL325 monitoring standards. The WEL-200 operates up to 200 feet line of sight between transmitter and receiver. The receiver connects with up to four transmitters with separate relay and pulse outputs for open and close edge functionality. The transmitter for the WEL-200 is compatible with both 8.2K and 10K monitored safety edges. FEATURES OF OUR WEL-200 WIRELESS EDGE LINK UL325-2018 compliant Operating range up to 200 ft. (61 m) Operating frequency 915 MHz NEMA 4X enclosures |
|
|
 |
EMX WEL-200 WIRELESS EDGE LINK COMPATIBLE w/ NC, 10K AND PULSE MONITORED OUTPUTS5605 |
| The WEL-200 system provides a complete wireless solution for interfacing sensing edges with gate and door operators. This wireless edge link eliminates the wiring between the safety edge and operator control box while ensuring compliance with 2018 UL325 monitoring standards. The WEL-200 operates up to 200 feet line of sight between transmitter and receiver. The receiver connects with up to four transmitters with separate relay and pulse outputs for open and close edge functionality. The transmitter for the WEL-200 is compatible with both 8.2K and 10K monitored safety edges. FEATURES OF OUR WEL-200 WIRELESS EDGE LINK UL325-2018 compliant Operating range up to 200 ft. (61 m) Operating frequency 915 MHz NEMA 4X enclosures |
|
|
 |
Linear SGET Gate Edge Radio Transmitter Works with SGEKAC, SGEKDC kits and SGER5637 |
| SGET also sold individually for expansion to two edges Works with SGEKAC, SGEKDC kits and SGER individual receiver. Part Number: SGET Features Works with all 10K monitored gate operators Uses 10K terminated edges 2 channels for up to 2 edges and transmitters per receiver Low Battery alert before failure Receiver powered by 12-30 VDC 2 output relays. 10K during normal conditions, shorted during sense or power fail Simple setup and programming Audio and LED feedback for installation and troubleshooting UL325 2016 approved for APeX2 operators Hard wired motor sensing for 12-24 volt DC motors; non-contact ACSENS module for high voltage AC motors (115-460VAC) |
|
|
|
|
 |
Miller Edge MGO20-2E-5, 5ft 3-Sided Safety Sensing Edge w/ Channel MG0020 5655 |
| The MGO20 sensing edge offers three-sided activation for enhanced protection. This slide-in style edge has a small profile which allows for versatility to suit a wide variety of applications from motorized doors and gates to industrial safe guarding on plant equipment. MGO20 is compatible with two mounting channel options and can be custom manufactured to user specifications for color, length, and outlet location. FEATURES · 3-sided activation · Easy to install · Optimum size for 1-1/2 inch gate surfaces · Mounts vertically or horizontally · Sealed assembly impervious to dust and debris · Mounting channel options · Custom manufactured to user specifications for color, length, and outlet location · Patented Alumaglas™ for superior performance · UL 325 Recognized Component · 1-year warranty · Made in USA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
