Sears Craftsman 41AS150-1 315 MHz Screw Drive Logic Board
The Sears Craftsman 41AS150-1 315 MHz Screw Drive Logic Board is a replacement receiver logic board assembly for select Sears Craftsman, LiftMaster, and Chamberlain residential garage door openers. This control board manages the opener radio receiver, remote and keypad memory, wall control input, safety sensor circuit, motor control commands, light relay functions, and basic opener logic on compatible units.
This batch of boards is part of the older Security+ 315 MHz purple learn button family. These boards are not the same as newer yellow learn button Security+ 2.0 boards, older red/orange 390 MHz boards, or very old DIP switch radio systems. Because the end panel, connector layout, motor style, and drive type can change between opener families, the original board label and opener model number should be matched before replacement.
What This Board Does
This receiver logic board acts as the main control center for the opener. In a compatible ac screw drive garage door opener opener, it interprets signals from the wall control, safety reversing sensors, remotes, keyless entry, and internal limit/force circuits, then sends the proper command to the motor and light system. When the original board fails, the opener may have no response, intermittent operation, remote programming problems, keypad issues, lights that do not behave correctly, or safety sensor communication errors.
Before replacing the board, inspect incoming power, the wall control circuit, safety sensor wiring, accessory wiring, and visible board damage. A surge, shorted wall button wire, water intrusion, or failed accessory can damage a replacement board if the cause is not corrected first.
Compatible With
This board is commonly associated with Sears Craftsman 41AS150-1, LiftMaster / Chamberlain AC screw drive openers, and the 41AS050-1 / 41AS150-1 board family. The model list below is intended to help match the correct opener family, but the original board number and parts diagram should still be used as the final check.
Common Compatible Models
- Sears Craftsman 41AS150-1
- Sears Craftsman 139.53992D, when confirmed by parts diagram
- Select LiftMaster AC screw drive openers manufactured from 2005 to 2015
- Select Chamberlain AC screw drive openers manufactured from 2005 to 2015
- Select screw drive opener applications using the 041AS050-1 replacement board family
Additional Compatible Product Families to Verify
- 315 MHz Security+ purple learn button screw drive opener applications
- LiftMaster / Chamberlain AC screw drive powerheads using 41AS050-1, 41AS050, or 41A5687 board references
Compatible Remote and Keyless Entry Families
- 371LM remote control family
- 377LM wireless keyless entry family
- Purple learn button Security+ 315 MHz accessories
Important Compatibility Notes
- For select Sears Craftsman, LiftMaster, and Chamberlain residential garage door openers only.
- Not for yellow learn button Security+ 2.0 openers.
- Not for red/orange 390 MHz Security+ openers unless the parts diagram specifically calls for this board.
- Not for older DIP switch systems.
- The end panel and connector layout must match the original board.
- Remote and keypad compatibility is helpful, but it does not replace board-number verification.
- This part is for screw drive applications, not belt drive or chain drive opener boards.
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster / Chamberlain / Sears Craftsman |
| Product Type | 315 MHz Security+ Receiver Logic Board with End Panel |
| Part Number | 41AS050-1 / 41AS150-1 |
| Application | select AC screw drive garage door openers manufactured from 2005 to 2015 |
| Drive Type | AC screw drive garage door opener |
| Frequency / Security | 315 MHz Security+ |
| Learn Button | Purple learn button on compatible units |
| Common Remote Family | 371LM, 373LM on compatible 315 MHz systems |
| Common Keyless Entry Family | 377LM |
| Notes | Match the original board number, opener model, learn button color, end panel style, and connector layout before installation. |
Also Known As / Related Part Numbers
The numbers below are commonly related to this board family, older Sears Craftsman board labels, LiftMaster replacement board labels, or common search variations. Related numbers should be matched carefully because not every 315 MHz purple learn button board is interchangeable.
- 041AS050-1
- 41AS050-1
- 41AS050
- 41AS150-1
- 41A5687
- 139.53992D logic board
- Sears Craftsman 315 MHz screw drive logic board
- LiftMaster 315 MHz screw drive receiver logic board
Technician Note
Do not choose this board by remote compatibility alone. A 371LM remote or 377LM keypad reference usually points to a 315 MHz Security+ system, but the board still has to match the drive type, end panel style, connector layout, motor harness, and Sears model number. A screw drive board, belt drive board, and chain drive board can all be 315 MHz purple learn button boards while still being different parts.
When replacing the board, transfer wires one at a time or photograph the original wiring first. After installation, remotes and keypads normally need to be reprogrammed, and the safety reversal system should be tested before returning the opener to service.
Before Ordering, Confirm
- Original board label shows 41AS050-1, 41AS050, 41AS150-1, 041AS050-1, or 41A5687.
- Opener is a compatible AC screw drive model manufactured in the 2005 to 2015 purple learn button era.
- Sears Craftsman model number matches 139.53992D or another documented screw drive model using this board family.
- Remote and keypad family is 315 MHz Security+ such as 371LM and 377LM.
- End panel, light socket area, terminals, and harness connectors match the original board.
Professional Advisory
This is an electronic replacement part installed inside the garage door opener powerhead. Disconnect power before service and avoid working on energized wiring. If the opener shows burned wiring, water damage, repeated board failure, motor failure, unsafe door movement, or damage from a lightning surge, the system should be inspected by a qualified garage door technician before a new board is installed.
Important Ordering Warnings
- Do not substitute this screw drive board for 41AB belt drive or 41AC chain drive boards.
- Some Sears model numbers are very similar; match the complete 139.xxxxxx model number.
- A failed RPM sensor, travel issue, motor problem, or shorted wall wire can mimic a bad logic board.
Questions & Answers
Is this board for Sears Craftsman 41AS150-1?
This board is commonly associated with Sears Craftsman 41AS150-1 when the opener uses the 41AS050-1 / 41AS150-1 315 MHz screw drive board family.
What drive type does 41AS050-1 fit?
41AS050-1 is for select AC screw drive garage door openers, not chain drive or belt drive openers.
What learn button color should the opener have?
Compatible units normally use a purple learn button for 315 MHz Security+ radio technology.
What are the common related part numbers?
Common related numbers include 041AS050-1, 41AS050-1, 41AS050, 41AS150-1, and 41A5687.
Will my remotes work after replacing the board?
Existing compatible 315 MHz Security+ remotes and keypads usually need to be reprogrammed to the replacement board after installation.
