Sentry 300 M 020335 Solar Charged Automatic Gate Opener Double Gate Basic Kit
- The Sentry is designed to be installed on farm gates up to 20 feet in length, ornamental iron gates up to 12 feet in length and chain link up to 14 feet in length.
- Made in the USA and powered by a 12 vdc battery which is charged by the included solar panel kit or AC transformer.
- The Sentry's energy efficient design makes it the first truly solar charged gate opener that eliminates the need for AC power to charge battery and will provide 8 weeks of operation with no sun.
- Sentry Plug N Go wiring harness eliminates the need for wiring and makes installation simple and quick, typically less than 2 hours.
The Sentry 300 Solar Charged Automatic Gate Opener Double Gate Basic Kit contains the first high quality commercial grade Do it Yourself dual gate opener. The universal mounting brackets will allow for push to open or pull to open installation easily bolt on to most existing gates. The linear actuator provides 400 lbs of thrust and has a compression rating of 1000 lbs. Open or close time is typically 16 seconds and will not dramatically vary with gate weight. The Sentry is designed to be installed on farm gates up to 20-Feet in length, ornamental iron gates up to 12-Feet in length and chain link up to 14-Feet in length. A full line of solar friendly accessories are available to allow you to customize your automated gate system to your needs. The Sentry 300 is covered by a 3 year limited warranty that repairs or replaces defective product and an additional 7 year extended limited warranty that has minimal charges for the affected component. The Single Gate Basic System Kit includes all mounting hardware, two 2 button transmitters, battery charge controller, solar panel kit for solar battery charging, AC transformer for optional AC battery charging, charge cable extension kit, installation DVD, full color installation/owner's manual, control box with preinstalled components, and linear actuator. Recommended battery is a sealed lead acid, group U1 battery not included in kit. Solar charging eliminates the need for AC power at the gate saving money and installation time. The energy efficient design of the Sentry Gate Opener allows up to 8 weeks of operation without any sun and additional solar panels are not needed under normal use. The solar panel kit includes a 5-Watt solar panel, 15-Feet of cable equipped with plug n go connector (no wiring), mounting bracket and hardware.
Included Accessories:
 | Sentry 300 520008 Transformer Low Voltage UL |
| This device being used is equipped with a DC plug for easy connection to the charge controller and can easily provide 575 cycles of operation a day without decreasing the battery charge. In the event AC power goes out the opener will operate for weeks on the battery (if cycles per day are below 20) before needing service. |
 | Sentry 300 030210 LCR Transmitter 2 Button Remote (2) |
| Operate gate or garage with compatible 433 MHz receiver Operates up to 300 ft typically. Transmitter Right Button to Receiver Programming: (Hold-Gate-Open) (Only if auto close timer is enabled) The 2-channel receiver allows for programming the P2 relay from momentary mode (default) to latching mode. Transmitter right button can be programmed to hold gate open, over-riding the auto-close feature if activated. |
 | Sentry 300 520015 Solar Panel Kit 5 Watt Solar Panel Sentry Gate Openers |
| Used to make your garage door opener compatible with the Sentry transmitters, reduce the devices in your car. The US-520015 Solar Panel Kit 5 Watt Solar Panel kit may be used to charge the battery in the Sentry gate opener. A 30% federal tax credit is available that applies to the total gate opener system cost when solar charged. Solar charging eliminates the need for AC power at the gate saving money and installation time. |
