|
Sentry 300 Garage Receiver 030209969 |
Sentry 300 Garage Receiver 030209 is used to make your garage door opener compatible with the Sentry transmitters, reduce the devices in your car. The kit contains receiver, transformer and a wire harness that easily installs to the existing garage door |
Availability: Not for Sale |
|
|
|
|
|
|
US Automatic 030207 DC Wireless Receiver 12/ 24 VDC 433.92MHz 5804 |
US Automatic 030207 DC Wireless Receiver 12/ 24 VDC 433.92MHz Our dual voltage 12/ 24 VDC Wireless Receiver allows you to install in almost any solar gate opener on the market. Operating frequency: 433.92MHz Relay normally open and common output wires The 12/24V basic receiver is a 2 relay output receiver, operating at 433,92 Mhz in AM/ASK modulation. It is designed for automatic closing systems and anti-burglar systems. The operating frequency is among the European harmonized frequencies; The antenna is connected with a F- type connector. The relay outputs are 2 : P1 and P2 P1 with relay contacts C and N/O P2 with relay contacts C and N/C or N/O according to the selection of J2 ( see par. 1H). |
|
|
|
US Automatic 500015 Entrapment Expansion Module for Patriot Control Board5807 |
Designed to monitor the connection and proper operation of multiple monitored external entrapment devices. Monitors up to 5 monitored contact edges (10K resistor) and up to 4 monitored photo eyes (N/C contact) for a total of 9 devices. Specifications: Supply Voltage: +12 or +24 Vdc Standby Current avg: 2 ma Monitoring Types identified: 1. Contact Edge with 8.25K resistor 2. Contact Edge with 10k resistor 3. Photo Eye N/C contact Total number of Monitored Devices that can be connected: 9 Contact Edge: can monitor up to 5 Photo Eye: can monitor up to 4 |
|
|
|
US Automatic 030200 Wireless Receiver for Ranger Gate Openers5894 |
US Automatic 030200 Wireless Receiver for Ranger Gate Openers Our Ranger 500 Receiver allows you to program all of your wireless accessories like keypads and clickers with ease. Capable of storing 42 unique transmitter codes Two relays - Primary relay momentary, secondary relay has a momentary or latching mode Learn button for programming Transmitter Left Button to Receiver Programming: (standard Open/Stop/Close function) 1. Press and hold the left transmitter button down. Red light on transmitter should be on. 2. On the receiver, push the P1 push-button until the green LD light comes on. 3. Release both buttons. Transmitter left button to receiver programming is complete. |
|
|
|
US Automatic 030205 Wireless Receiver for Patriot Gate Openers5895 |
The low current receiver item 030205 is a 2 relay output receiver, operating at 433,92 Mhz in AM/ASK modulation. It is designed for automatic closing systems and anti-burglar systems with a very low rest current consumption. The operating frequency is among the European harmonised frequencies; The antenna is connected with a F- type connector. The relay outputs are only with NO contact with the common contact shorted to Ground. The operating mode of K1 is Pulse and of K2 can be Pulse or Latch. The power supply is 12 Vdc. The IP grade of 2X allows only indoor installations. The product fully complies with the EMC European Regulations (CE) and the FCC Part 15 Regulations. - Main features • Very low rest current consumption • 42 storable transmitter keys • Single transmitter key or Full memory erasure • Programmable operation mode of the 2 relays: momentary, latching • Easy transmitter programming |
|
|
|
USAutomatic 030223 Nexx Gate WIFI Controller Weather Resistant Smartphone App5921 |
The USAutomatic Nexx Gate with WiFi and Bluetooth for Gate Operation is a weather-resistant companion device compatible with all USAutomatic products, allowing users to open, close and monitor their gate from anywhere in the world. Details The USAutomatic Nexx Gate with WiFi and Bluetooth for Gate Operation is a weather-resistant companion device compatible with all USAutomatic products, allowing users to open, close and monitor their gate from anywhere in the world. With power, activity and WiFi LED indicator lights, it's easy to install and use. Control gates remotely using the Nexx Home app or by using voice commands; the Nexx Gate works seamlessly with Google and Alexa Assistant-enabled devices. Its security is bolstered with best-in-class encryption technology and the Nexx Gate also keeps a log with seven days of gate activity. Features: Easy Installation No Hidden Monthly Fees Open/Close Gate Operator Best-In-Class Encryption Technology Remote Control Via Nexx Home App Remote Control Via Voice Commands Control Share By Authorizing Other People Notifications For Gate Openings And Closings Power, WiFi And Activity LED Indicator Lights Specifications: Color: Black 7-Day Log Of Gate Activity Compatible With USAutomatic Gate Operators Works With Alexa And Google Assistant Enabled Devices |
|
|