|
Sentry 300 Photo Eye Kit 550012961 |
The Photo Eye Kit 550012 is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection |
|
|
|
US Automatic 550011 Photo Eye Kit - Battery Operated Infrared Through Beam5805 |
The infrared photo eyes are a People and Property safety device intended for use with automatic gate operating systems. Swing gate operators require at least one external monitored entrapment device for gate operation and Slide gate operators require at least two external monitored entrapment devices (one for each direction) for gate operation per UL325 the standard for gate operator safety. See gate operator installation manual. The transmitter can be powered by two 3.6 vdc lithium batteries (model - ER14505) or it may be hard-wired to the gate operator control board. The expected battery life should exceed 1 year. TECHNICAL SPECIFICATIONS Power supply TX: 3.6V Battery voltage 2 x 3.6V Battery capacity 2.4Ah Battery type ER14505 Expected battery life 15 months Power supply RX 9 / 24 Vac/dc Current consumption Transmitter 400 µA Current consumption Receiver 20 mA Double contact relay with serial exchange yes RX output contacts 1 NO / 1 NC Max DC power on relay contacts 24W / 48V Max AC power on relay contacts 60 VA / 48 V Operating temperature -4°F /+131°F Housing protection IP55 Rated range 42 ft / 13 m Dimensions with hood: WxHxD 75 x 105 x 105 mm 2.95 x 4.13 x 4.13 in Payments & Returns Po |
|
|
|
US Automatic 550014 Photo Eye Safety Sensors works w/ Ranger and Patriot Openers5896 |
The photo eye is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. The infrared photo eyes are a People and Property safety device intended for use with automatic gate operating systems. Swing gate operators require at least one external monitored entrapment device for gate operation and Slide gate operators require at least two external monitored entrapment devices (one for each direction) for gate operation per UL325 the standard for gate operator safety. See gate operator installation manual. The transmitter can be powered by two 3.6 vdc lithium batteries (model - ER14505) or it may be hard-wired to the gate operator control board. The expected battery life should exceed 1 year. Rated range up to 42 feet / 13 meters in most conditions |
|
|