The BEAMBOX provides motion and presence detection, utilizing 15 active infrared spots that can be programmed into nine uniquely shaped detection zones.
BEA’s BEAMBOX is ideal when very specific detection patterns are required, but not readily available in off the shelf sensors. These patterns are often necessary in trains, buses, turnstiles, back office retail and other unique areas.
The BEAMBOX provides a DRY contact relay that can be used to switch any peripheral device, such as a buzzer, light or video camera.
Technology | Active infrared With Background Analysis |
|---|
Detection Mode | Motion & Presence |
|---|
Optical Features | 15 independent IR spots with a diameter of typ. 0.43” |
|---|
Maximum Mounting Height | 8 ?’ (flush mounting) |
|---|
Tilt Angles | 0 – 20° |
|---|
Detection Zone | 3 3/10’ (W) × 3 9/10’ (D)
@ mounting height 6 ½’; tilt angle 20° |
|---|
Reaction Time | < 100 ms |
|---|
Supply Voltage | 12 – 30 VAC ±10%
12 – 45 VDC ±10% |
|---|
Power Consumption | < 3 W (VA) |
|---|
Output
Maximum Contact Voltage
Maximum Contact Current
Maximum Switching Power | Relay (free of potential change-over contact)
42 VAC – 60 VDC
1 A (resistive)
30 W (DC) / 60 VA (AC) |
|---|
Monitoring Input
Input Voltage
Input Current | Optocoupled (free of potential)
10 – 24 VDC
< 10 mA (@ 24 V) |
|---|
Connection (Sensor Side) | Unplugged integrated 7-pin connector |
|---|
Hold Time | 0.5 – 9 s (adjustable) |
|---|
LED Signal | Red and Green |
|---|
Mains Frequency | 50 – 60 Hz |
|---|
Temperature Range | -13 – 126 °F (operating);
-22 – 140 °F (storage) |
|---|
Degree of Protection | IP41 |
|---|
Dimensions | 5 ½” (W) × 1 ½” (H) × 2 ?” |
|---|
Weight | 3 ½ oz |
|---|
Enclosure Material / Color | Polycarbonate / Black |
|---|
Cable Length | 8’ |
|---|
