BEA’s IXIO-DT1 is a dual technology motion and presence sensor, combining microwave activation and infrared presence detection for the automatic sliding door industry.
This solution is highly flexible and user-friendly for sliding doors, industrial doors, vehicle gate detection and off-door automation.
The IXIO-DT1 can be adjusted into ANSI compliance and has earned a comprehensive list of credentials and certifications, including FCC and IP54.
The IXIO-DT1 ensures convenience, safety and energy efficiency for BEA customers and end users.
Detection mode: | Motion
minimum detection speed: 2 in/s | Presence
typical response time: < 200 ms
(max: 500 ms) |
|---|
Technology: | Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power:
< 20 dBm EIRP
Transmitter power density: < 5 mW/cm2 | Active infrared with background analysis
Spot: 2” × 2” (typ)
Number of spots: max. 24 per curtain
Number of curtains: 2 |
|---|
Mounting height: | 6’6” – 11’6”
local regulations may impact acceptable mounting height (pedestrian
applications only) |
|---|
Sensor temperature
range: | -13 – 131 °F *
0 – 95% relative humidity, non-condensing
LCD screen is operational from 14 – 131 °F.
The sensor may still be programmed in colder temperatures, but with
the remote control. |
|---|
Output
Relay 1
Relay 2 |
Electromechanical relay (potential and polarity free)
Max. contact current: 1 A
Max. contact voltage: 30 VAC
Adjustable hold time: 0.5 – 9 s
Solid-state relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 VDC / 30 VAC |
|---|
Test/Monitoring input: | Sensitivity:
Low: < 1 V
High: > 10 V (max. 30 V)
Response time on test request: typical < 5 ms |
|---|
Supply voltage: | 12 – 24 VAC ±10%
12 – 30 VDC ±10%
to be operated from SELV-compatible power supplies only |
|---|
Power consumption: | < 2.5 W |
|---|
Noise: | < 70 dB |
|---|
Degree of protection: | IP54 |
|---|
FCC certification: | FCC: G9B-100606
IC: 4680A-100606 |
|---|
Compliance: | ISO 13849 PL «c» CAT. 2
(under the condition that the door control system monitors the sensor
at least once per door cycle) |
|---|
