BEA’s IXIO-DT1V is the premier motion and presence sensor for sliding doors. Coupled with the dual technology, the
IXIO-DT1V includes an NTSC-compliant video surveillance camera that provides high quality footage of those entering and exiting a building.
The IXIO-DT1V can be adjusted into ANSI compliance solution and has earned a comprehensive list of credentials and certifications, including FCC and IP54.
The high quality camera offers a wide field of view and is ideal for video documentation of pedestrian traffic, liability and warranty documentation, people counting and security applications, in a variety of environments.
The IXIO-DT1V ensures convenience, safety and energy efficiency on automatic sliding doors
Detection mode: | Motion
minimum detection speed: 2 in/s | Presence
typical response time: < 200 ms
(max: 500 ms) |
|---|
Technology: | Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power:
< 20 dBm EIRP
Transmitter power density: < 5 mW/cm2 | Active infrared with background analysis
Spot: 2” × 2” (typ)
Number of spots: max. 24 per curtain
Number of curtains: 2 |
|---|
Mounting height: | 6’6” – 11’6”
local regulations may impact acceptable mounting height (pedestrian
applications only) |
|---|
Sensor temperature
range: | -13 – 131 °F *
0 – 95% relative humidity, non-condensing
LCD screen is operational from 14 – 131 °F.
The sensor may still be programmed in colder temperatures, but with
the remote control. |
|---|
Output
Relay 1
Relay 2 |
Electromechanical relay (potential and polarity free)
Max. contact current: 1 A
Max. contact voltage: 30 VAC
Adjustable hold time: 0.5 – 9 s
Solid-state relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 VDC / 30 VAC |
|---|
Test/Monitoring input: | Sensitivity:
Low: < 1 V
High: > 10 V (max. 30 V)
Response time on test request: typical < 5 ms |
|---|
Supply voltage: | 12 – 24 VAC ±10%
12 – 30 VDC ±10%
to be operated from SELV-compatible power supplies only |
|---|
Power consumption: | < 2.5 W |
|---|
Noise: | < 70 dB |
|---|
Camera: | Voltage regulator (built into wire harness): 6.6 – 36 VDC (±10%), 6 – 28 VAC (±10%)
Operating temperature:
-22 – 140 °F (max. RH: 95%)
Image Sensor: CMOS
NTSC output: 720 (H) × 480 (V)
Frame rate: 30 fps
AE control: auto
Electronic shutter: 1 s ~ 1/10,000s
AWB: Auto |
Video output: 1.0 (Vp-p) / 75O
Horizontal resolution: 480 TVL
Sync system: Inter-Sync
Minimum illumination: 0.01 LUX
Gain control: auto
S/N ratio: > 50 dB |
|---|
Degree of protection: | IP54 |
|---|
FCC certification: | FCC: G9B-305015
IC: 4680A-305015 |
|---|
Compliance: | ISO 13849 PL «c» CAT. 2
(under the condition that the door control system monitors the sensor at
least once per door cycle) |
|---|
