BEA 10LZRFLATSCAN-LERS, LZR-FLATSCAN SW Low Energy Right Silver Sensor System
The BEA 10LZRFLATSCAN-LERS LZR-FLATSCAN SW low energy sensor system is part of BEA's door-mounted laser safety sensor family for automatic pedestrian swing doors. This product is used where the door needs a compact sensor on the moving leaf to watch the door face and hinge area instead of relying on older multi-box swing-door safety layouts. The LZR-FLATSCAN SW platform uses laser Time-of-Flight presence detection and is commonly selected for low-energy pedestrian entrances, healthcare doors, education buildings, office entries, and other automatic swing-door openings where clean door-mounted protection is needed.
This specific part is the right silver low-energy version. It is intended for compatible low-energy swing-door applications where a single approach-side LZR-FLATSCAN SW may be used in static mode when the door operator, controller, wiring, and current safety requirements support that layout. The part number should be matched to the door hand and finish, because BEA LZR-FLATSCAN SW sensors are handed and the left and right units are not simply cosmetic variations. The silver finish matters when replacing a visible door-mounted sensor on storefront, healthcare, aluminum, or painted door systems.
Correct fitment matters on this product. LZR-FLATSCAN SW is for automatic pedestrian swing doors, not driveway gate photo eye service, vehicle loop detection, overhead door commercial motion sensing, or general access-control input use. Full-energy swing doors normally require sensors on both sides of the door, while certain low-energy applications may use a single sensor on the approach side. Any replacement should be tested after installation for detection field, teach-in, monitoring, relay behavior, inhibit/reactivation logic, and safe door operation.
Compatible With
This product is compatible by BEA LZR-FLATSCAN SW system type, door hand, finish, wiring, and door controller requirements. It is not selected by brand name alone.
- BEA LZR-FLATSCAN SW automatic swing door sensor systems where the same handed sensor is specified
- Low-energy automatic pedestrian swing doors requiring a right-hand/right-mount LZR-FLATSCAN SW sensor, when the controller supports the application
- Automatic pedestrian swing door controllers with compatible monitored safety or presence inputs
- Door-leaf safety and hinge/pinch-zone safety applications on compatible swing doors
- Approach-side low-energy static-mode applications when allowed by the door manufacturer and applicable standards
- Full-energy swing-door applications only as part of a properly configured paired-sensor installation where required
- Compatible BEA remote-control setup and configuration procedures where field adjustment is required
- Selected storefront, healthcare, school, office, public building, and commercial pedestrian swing-door entrances using BEA LZR-FLATSCAN SW hardware
Features & Specifications
| Manufacturer | BEA Sensors |
|---|
| Product Type | Low-energy swing door laser safety sensor system |
|---|
| Part Number | 10LZRFLATSCAN-LERS |
|---|
| Sensor Family | LZR-FLATSCAN SW |
|---|
| Hand / Mount Side | Right |
|---|
| Color / Finish | Silver |
|---|
| Technology | Laser Time-of-Flight presence detection |
|---|
| Detection Use | Door leaf safety and hinge/pinch-zone safety on compatible automatic pedestrian swing doors |
|---|
| Typical Detection Range | Up to 13 ft diagonal under specified conditions |
|---|
| Power Requirement | 12-24 VDC +/- 15%; DC power only |
|---|
| Power Consumption | 2 W or less |
|---|
| Output | 2 electronic relay outputs, installation dependent |
|---|
| Protection Rating | IP54 |
|---|
| Dimensions | Approx. 5-1/2 in W x 3-1/3 in H x 1 in D; mounting bracket adds approximately 1/4 in |
|---|
| Important Note | Match hand, color, kit contents, controller input, power supply, and door type before ordering |
|---|
Also Known As / Related Part Numbers
- 10LZRFLATSCAN-LELB - low energy left black reference
- 10LZRFLATSCAN-LELS - low energy left silver reference
- 10LZRFLATSCAN-LELW - low energy left white reference
- 10LZRFLATSCAN-LERB - low energy right black reference
- 10LZRFLATSCAN-LERS - low energy right silver reference
- 10LZRFLATSCAN-LERW - low energy right white reference
- 10LZRFLATSCAN-LB / 10LZRFLATSCAN-LS / 10LZRFLATSCAN-LW - left sensor-only color references
- 10LZRFLATSCAN-RB / 10LZRFLATSCAN-RS / 10LZRFLATSCAN-RW - right sensor-only color references
- LZR-FLATSCAN SW, LZR FLATSCAN SW, 10LZRFLATSCAN SW - common search variations
- 10REMOTE - BEA universal remote control, related setup accessory
- 35.1329 - LZR-FLATSCAN SW primary/secondary harness, related accessory
- 20.5433 - LZR-FLATSCAN control harness, related accessory
- 70.5753 - LZR-FLATSCAN SW spacer, related accessory
- 10PS12-24, 10PS12-24D, 10PSMDR2024, 10PSST242, 10PSVR5T - related BEA power supply/accessory references where the installation calls for them
Technician Note
Before replacing a LZR-FLATSCAN SW sensor, confirm whether the door is low-energy or full-energy, which side of the door the sensor mounts on, the color of the housing, and whether the existing installation uses a complete kit or a sensor-only service part. A left sensor, right sensor, low-energy kit, and sensor-only replacement can look similar in a product search but may not solve the same field problem.
Before Ordering
- Match the original BEA part number on the installed sensor or service documentation.
- Confirm left-hand or right-hand mounting before ordering.
- Match the visible finish: black, silver, or white.
- Confirm the door is an automatic pedestrian swing door, not a gate, barrier arm, sliding door, or industrial overhead door application.
- Confirm the door controller supports the required monitored safety, presence, relay, inhibit, and setup functions.
- Confirm that the sensor will be powered from a correct DC power source.
- Check whether spacer, harness, remote-control setup, or power-supply accessories are required.
Professional Advisory
Automatic pedestrian door safety sensors should be installed, configured, and tested by a qualified automatic door technician. Do not bypass monitored safety inputs, remove required sensors, or substitute an unapproved sensor to keep a door running. After service, the door must be tested for detection coverage, approach-side behavior, swing-side behavior, pinch-zone protection, relay output, monitoring, and safe operation.
Product-Specific Q&A
Is 10LZRFLATSCAN-LERS a complete low-energy LZR-FLATSCAN SW sensor system?
10LZRFLATSCAN-LERS is written for the BEA LZR-FLATSCAN SW low-energy right silver sensor system. Kit contents should still be checked against the product page, carton label, and job requirements before replacing an installed unit.
Can this right sensor be used on the opposite side of the door?
No. BEA LZR-FLATSCAN SW sensors are handed. A left-mount and right-mount sensor should be matched to the original door layout and manufacturer instructions.
Can one LZR-FLATSCAN SW be used on a low-energy swing door?
Certain low-energy applications may use a single approach-side sensor in static mode when the door operator and current requirements allow it. Full-energy swing doors normally require sensors on both sides of the door.
Can this sensor be powered by a 24VAC transformer?
No. LZR-FLATSCAN SW requires DC power. If the installation only has AC power, the correct transformer and rectifier arrangement must be used as specified by BEA and the door manufacturer.
Is this product for driveway gates or vehicle detection?
No. This LZR-FLATSCAN SW product is for automatic pedestrian swing doors. It should not be used as a driveway gate photo eye, loop detector, exit probe, or vehicle safety device.
