BEA’s LZR-FLATSCAN 3D SW is a four-curtain, door-mounted, safety system for automatic swing doors. Using LASER Time-of- Flight technology, its three-dimensional detection field guarantees full-safety coverage of the opening area. Ideal for environments in healthcare, education, and commercial settings.
The deep detection pattern reduces sudden door movements, preventing contact as a person walks through the doorway, benefitting individuals with limited mobility, and reducing the wear and tear of the door. Additional safety features include Leading Edge Safety for detection beyond the door leaf and coverage of the hinge area with Finger Detection Technology™.
Technicians can reduce installation and setup time with Hand Gesture Setup and the built-in knowing act device. Instead of coordinating and wiring activation devices, utilize Virtual Push Buttons for a non-contact form of door activation. Convenient in settings that rely on hygienic solutions, like surgical environments.
The LZR-FLATSCAN 3D SW is capable of exceeding the 156.10 section 8.2.2.3 standard for detection area and meets section 8.1.4 for monitoring.
Technology
LASER scanner, Time-of-Flight measurement
Detection Mode
Presence
Max. Detection Range
13’ (diagonal) with reflectivity of 2%(e.g. at (W) × 5’ > max. (H) × 12’)
Recommended Mounting Height
75 – 98”
Opening Angle
Door leaf safety: 80°Pinch zone safety: 20°
Angular Resolution
Curtain 1: 0.2°Curtain 2: 1°Curtain 3: 1.7°Curtain 4: 2.5°
Tilt Angles
0 – 5°
Typ. Min. Object Size
¾” @ 13’ in curtain C1
Emission Characteristics(IEC 60825-1)
IR LASER: wavelength 905 nm; output power < 0.1mW;Class 1
Supply Voltage*
12 – 24 VDC ±15% (to be operated from SELV-compatible power supplies only)
Power Consumption
< 2 W
Response Time
Typ. < 120 ms (Max. 220 ms)
OutputMax. Switching VoltageMax. Switching Current
3 electronic relays (galvanic isolation - polarity free)42 VAC / VDC100 mA
Dimensions
5 ¾” (L) × 3 ½” (H) × 2 ?” (D)mounting base: D + ¾”spacer: D + 1 ½”
Material - Color
PC / ASA - Black
Protection degree
IP44 (IEC 60529)
LED Signals
1 RGB LED: detection/output status
Temperature Range
-13 – 140 °F
Humidity
0 – 95% non-condensing
Vibrations
< 2 G
Compliance
ISO 13849-1 Pl “d”/ CAT2; IEC 60825-1; IEC 62061 SIL 2UL10 – file # R39071
* This sensor is powered by DC voltage only. If only VAC power is available, a 12V transformer paired with a rectifier must be used. Do not use a 24V transformer and rectifier as this will cause damage to the product.
[ITEMPRICE]
