Product Overview
The Digi-Code DC-5035 is a 433 MHz open/close/stop visor transmitter designed for commercial radio-control applications. It has three labeled buttons for open, close, and stop commands, including a larger red stop button for quick identification. It is intended to work with a compatible Digi-Code open/close/stop receiver rather than a standard single-channel residential garage receiver.
This transmitter is most often paired with the Digi-Code DC-5135 receiver on commercial overhead door operators and select gate operator control systems that support separate open, close, and stop terminals. It is not part of the 300 MHz Multi-Code family or the 310 MHz Stanley-compatible family. The receiver and transmitter must be matched as a 433 MHz O/C/S system for proper operation.
Compatible With
- Digi-Code DC-5135 433 MHz commercial open/close/stop receiver
- Commercial overhead door operators wired through a compatible DC-5135 receiver
- Select gate operator control circuits where a DC-5135 receiver is properly wired to open, close, and stop inputs
- Digi-Code 433 MHz open/close/stop radio systems
- Applications needing three separate radio commands instead of single-button sequential control
- Service replacement for a lost or damaged DC-5035 transmitter when the receiver is already installed and operating
Features and Specifications
| Manufacturer | Digi-Code |
|---|
| Product Type | Commercial open/close/stop visor transmitter |
|---|
| Part Number | DC-5035 / 5035 |
|---|
| Frequency | 433 MHz |
|---|
| Button Count | 3 buttons |
|---|
| Button Functions | Open, Close, Stop |
|---|
| Compatible Receiver | Digi-Code DC-5135 |
|---|
| Application | Commercial door and select gate O/C/S radio control |
|---|
| Mounting / Carry Style | Visor clip transmitter |
|---|
| Notes | Not for 300 MHz Multi-Code or 310 MHz Stanley-compatible receivers |
|---|
Also Known As / Related Part Numbers
- 5035
- DC-5035
- DC5035
- Digi-Code 5035
- Digi-Code DC-5035
- Digi-Code DC5035
- DC53035
- 433 MHz O/C/S transmitter
- Open Close Stop transmitter
- Digi-Code DC-5135
- DC-5135
- DC5135
- Digi-Code 5135
Common Replacement or Use Cases
- Lost transmitter for a DC-5135 receiver system
- Need a replacement 433 MHz open/close/stop visor remote
- Commercial operator requires separate open, close, and stop radio commands
- Existing transmitter buttons or case are damaged
Technician Note
Confirm the site has a DC-5135 or compatible Digi-Code 433 MHz O/C/S receiver. A DC-5035 transmitter by itself will not operate a standard receiver or an opener without the matching O/C/S receiver installed.
Before Ordering
- Confirm the receiver is Digi-Code DC-5135 or a compatible 433 MHz O/C/S receiver
- Confirm the site uses separate open, close, and stop commands
- Do not order for 300 MHz Multi-Code systems
- Do not order for 310 MHz Stanley-compatible systems
- Check whether the receiver memory or transmitter coding needs to be programmed by an authorized technician
Professional Advisory
Commercial door and gate operators must keep stop controls and safety devices working correctly. If the operator does not respond properly to open, close, or stop commands, have a qualified technician inspect the receiver wiring and operator controls.
Important Ordering Warnings
- This transmitter requires a compatible 433 MHz O/C/S receiver
- Not a universal three-button garage remote
- Not compatible with DC-5135 unless the receiver is properly powered and programmed
Product Questions and Answers
What receiver does the DC-5035 work with?
It is designed to work with the Digi-Code DC-5135 433 MHz commercial open/close/stop receiver.
What do the three buttons do?
The buttons are used for separate Open, Close, and Stop commands through a compatible receiver and operator control circuit.
Can the DC-5035 replace a Multi-Code 300 MHz remote?
No. The DC-5035 is a 433 MHz open/close/stop transmitter, not a 300 MHz Multi-Code remote.
Is the stop button functional on every opener?
The stop button works only when the matching receiver is correctly wired to an operator that supports a stop input.
Can I use this transmitter without the DC-5135 receiver?
No. The transmitter must be paired with a compatible Digi-Code 433 MHz open/close/stop receiver system.
